A multi-input multi-output (MIMO) antenna is designed and discussed for multi-band applications. The constituent antennas are composed of four L-shaped elements and a ground plane. When placed beside each other to form a MIMO antenna, a T-bar shaped parasitic structure is also embedded between the antennas on the backside of the substrate to increase the inter-element isolation. The triple-band pe

A compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the r

The design of a circular-shaped differential wideband band pass filter (BPF) is described. The proposed filter is compact and provides good common mode (CM) suppression. It consists of four ports with a circular-shaped differential mode (DM). The analysis of the filter has been carried out by bisecting it into identical two-port networks along the symmetry plane, resulting in a band stop or band p

This paper deals with a near-field to far-field transformation able to predict the radiation of UHF antennas located over a lossy ground. From near-field measurements, an equivalent set of dipole sources is obtained as a model of the characterized antenna. The paper details the main steps of the transformation and describes the specific experimental set-up designed for the application. Simple dir

A novel tri-beam slot antenna array based on substrate integrated waveguide (SIW) technology is proposed in this paper. The beam forming network is a 3 × 3 Butler matrix consisted of three couplers and four phase shifters. A 1.76 dB coupler is located between two 3 dB couplers, with this arrangement; the input signal can be divided into three parts with the same amplitude and certain phase differe

In this paper, edge-broad-side coupled spiral resonator (EBC-SR) is proposed to enhance the miniaturization of the metamaterial resonators. After a comparative analysis, it is found that the proposed strategy can drastically reduce the electrical size of metamaterial resonators. This is due to the use, at the same time, advantages of edge coupling, broad-side coupling, and self-coupling. A lumped

A magnetic dipole quasi-Yagi antenna based on a dielectric resonator (DR) is proposed in this letter. The dominate TE mode of the rectangular DR is used as a magnetic dipole which can be differentially fed by the coplanar strip line (CPS). Thanks to the DR employment, the proposed antenna has several advantages such as compact size and flexible design which means the 3-D dimensions of the DR can b

In this paper, an electromagnetic band gap (EBG) metasurface (MS) superstrate-based circularly polarized antenna for the WiMAX (3.5 GHz) band is proposed. The proposed structure comprises a 2 × 2 slot-loaded rectangular patch MS array that can be perceived as a polarization-dependent EBG MS superstrate. Furthermore, to achieve circular polarization, the proposed antenna has an inclined coupling sl

Two coaxial waveguide bend mode converters that transform coaxial transverse electromagnetic mode to TE coaxial waveguide mode are presented in this paper. Both converters are designed and optimized on the basis of the strictly derived mode coupling coefficients. Conversion efficiencies of both converters are over 99% and the power-handling capacities reach a gigawatt level. The combined dual-bend

In this paper, a sandwiched type frequency selective surface (FSS) is designed and analyzed. The design procedure and operating principle is given based on the equivalent circuit model. The proposed FSS includes two identical layers of periodic metallic arrays, which are separated by a foam layer. In each layer of the periodic array, the unit cell is composed of a gridded-triple square loop struct

In this work, a new reconfigurable discrete 1D beam-steering Fabry?Perot cavity antenna with enhanced radiation performance is presented. It consists of a probe-fed patch antenna printed on the ground plane and a reconfigurable metasurface acting as the upper partially reflective surface to realize beam steering. By utilizing 6 × 6 proposed reconfigurable unit cells on the superstrate, the beam-st

This paper reports a novel fourth-order quasi-elliptic bandpass filter (BPF) based on capacitive-loaded eighth-mode substrate integrated waveguide (CLEMSIW) cavities. The CLEMSIW cavity is constructed by the conventional eighth-mode SIW with two dielectric substrates and three metal layers; a metal via is employed to connect the middle and bottom metal layers. The middle metal layer achieves a lar

This paper presents a novel concept named meta-waveguide structures to design slot array antennas based on metasurface. The proposed method investigates the geometrical parameters of the embedded metasurface and their relations to build up the engineered electric and magnetic fields to introduce efficient slot array antennas. This approach eliminates the necessity of using the well-known offsets i

This paper proposes the novel application of three meta-heuristic optimization algorithms namely crow search algorithm, moth flame optimization, and symbiotic organism search algorithm for the synthesis of uniformly excited multiple concentric ring array antennas. The objective of this work is to minimize the sidelobe level (SLL) and maximize the peak directivity simultaneously. Three different ca

This paper presents a novel design of a low profile circularly polarized (CP) metasurface (MTS) antenna with in-band radar cross-section (RCS) reduction property. The MTS is loaded as a superstrate on slot antenna and it can be viewed as a polarization-dependent MTS (PDMTS). The rectangular patch-based PDMTS is analyzed using characteristic mode analysis to find two orthogonal degenerate modes, wh

This paper describes and analyzes a new technique used in -slot antenna to generate circular polarization (CP). The CP characteristics were investigated carefully by studying the surface current distribution, the phase difference between the left hand circular polarization (LHCP) and right hand circular polarization (RHCP) at some resonant frequencies, and the measured values of the axial ratio ba

A compact transition between conductor-backed coplanar waveguide (CBCPW) and substrate integrated suspended line (SISL) is presented. Compared to the reported transitions from CBCPW to SISL, performance and compactness are improved. For demonstration purpose, a multilayer transition is designed and fabricated for operation up to 46 GHz. Experimental results, based on an electronic calibration and

A novel flexible radio frequency (RF) sensor is designed to facilitate the accurate testing of various samples used in the biomedical industry at the industrial, scientific and medical (ISM) frequency band. The proposed RF biosensor comprises a liquid channel-loaded interdigitated capacitor, which is integrated on a coplanar waveguide structure. The prototype of the sensor is fabricated on a 0.13

In this work, a new compact, low profile, frequency, and end-fire pattern reconfigurable antenna is presented. The proposed antenna consists of four parasitic elements and an electric-inductive-capacitive (ELC) resonator enclosed with a closed ring resonator (CRR). The reconfigurability in the proposed antenna is achieved with the help of five PIN diodes (D1?D5) embedded on the top surface of the

In this paper, a novel compact dual-band microstrip patch antenna with dual-radiation modes is investigated. The proposed antenna consists of a rectangular ground plane, a U-shaped feed probe, and an H-shaped slot radiating patch. By adjusting the size of these structures, a dual-band antenna can be obtained. In the low-frequency band, the antenna can radiate one radiation beam with high gain. In

A new class of switchable bandpass filter using PIN diodes is presented in this paper. The design aims at achieving a multistate switchable bandpass filtering characteristics between the passbands centered at 2.4, 3.5, and 5.2 GHz. The proposed filter is designed by assembling two /2 open-ended and four short-ended /4 uniform impedance resonators. The open-ended resonator generates a fixed passban