The backscatter from radar object carries Doppler information of scatterers on the object determined by the radial velocity of scattering points and the radar transmitted frequency. For a rotating object this information is contained in the frequency characteristics over varying aspect angle. Frequency characteristics are used to create projections for Doppler radar tomographic imaging. This paper

High-resolution imaging with an airborne synthetic aperture radar (SAR) calls for precise trajectory measurements that can hardly be achieved with common navigation systems. In this paper, an efficient method called the local-quadratic map-drift autofocus is developed for the estimation of residual (uncompensated) motion errors directly from the received radar data. The map-drift autofocus is appl

This work focuses on the circuit modeling and full-wave analysis behavior of circular split ring resonator (SRR). We investigate an equivalent circuit model that allows calculating the resonant frequency from the geometric parameters. Equivalent LC parameters of inductance and capacitance are derived using conformal mapping and constitutive equations. Lumped element equivalent circuit models of re

The purpose of this paper is twofold. It first describes how Microwaves were progressively organized by Professional Engineering Institutions in Europe in the years 1960?2000, essentially through individual efforts over many years. The first formal Microwave event organized in Europe was the European Microwave Conference in London, 1969, opening a series that continues as the European Microwave We

This is the first report on novel mushroom-type electromagnetic band gap (EBG) structures, consisting of fractal periodic elements, used for enhancing the gain of microstrip patch antennas. Using CST Microwave studio the performance of rectangular patch antenna has been examined on proposed fractal EBG substrates. It is found that fractal EBGs are more effective in suppressing surface wave thus re

This paper addresses the study of the variation effects of incident plane wave on a multiconductor transmission line (MTL), using a coupling circuit model of MTL line with plane wave based on the method of characteristics (Branin method). This model is valid in the time and frequency domains. It has also an advantage of not presupposing the conditions of the charges applied to its ends, which allo

In this paper, a simple synthesis technique to obtain the geometrical parameters of the modified circular ring for angular and polarizations (perpendicular and parallel) stable frequency selective surface (FSS) has been discussed. The geometrical parameters of the modified circular ring FSS structure have been achieved using the proposed synthesis technique, which is based on the equivalent circui

A broadband circularly polarized (CP) beam-steering antenna array is presented. CP antenna is composed of four identical CP slot elements with 2 × 2 configuration and a 4 × 4 feeding network. CP slot element is utilized in array form to improve impedance bandwidth and sequentially rotation method is used to increase axial-ratio bandwidth. Moreover, uni-planer compact electromagnetic band-gap struc

Asymmetric slits loaded irregular shaped microstrip patch antenna with three different ground structures is proposed. All three antennas show triple band characteristics. First antenna with regular ground plane resonates at 1.95, 2.4, and 4.90 GHz with good radiation characteristics and shows right-hand circular polarization at 1.95 GHz. 18.75% of compactness is achieved with triple band character

In this paper, a dual wideband microstrip antenna (MSA) has been presented for wireless local area networks (WLAN), worldwide interoperability for microwave access (Wi MaX) and U-NII band applications. The antenna is designed and simulated using CSTMWS V'10. The main goal of this paper is to get multi-frequency behavior by cutting resonant slots into the patch of the antenna and a wideband antenna

A new circularly polarized planar array antenna using linearly polarized microstrip patches is designed and optimized for X-band wireless communication applications. Four square patch elements with feed network are used to design the circularly polarized array antenna. The feed network consists of microstrip lines on the obverse side of the dielectric substrate and slot line on the reverse side of

This paper presents an innovative design of an Ultra Wide-Band (UWB) impulse radiation source. The transmitting system is composed of an UWB antenna with an integrated optoelectronic generator, which is able to feed the system with appropriate waveforms, a pulsed high voltage source, and an optical command system. The radiation source is the elementary part of a forthcoming short-range UWB Radar w

This paper presents small balanced bandpass filters exhibiting wide differential-mode pass bands and high common-mode suppression. The filters are implemented in microstrip technology and their topology consists of multisection mirrored stepped impedance resonators (SIRs) alternating with mirrored interdigital capacitors. The mirrored SIRs provide the required common-mode transmission zeros to ach

Impedance tuners are key instruments used for load- and source?pull measurements. They are crucial for any active microwave components, circuits, and systems characterization and optimization. This paper reports theoretical, simulated, and experimental results related to the development of a novel programmable impedance tuner offering high-voltage standing wave ratio (VSWR). After presenting the p

Traditional near-field antenna measurements use the sampling theorem to reconstruct the antenna pattern perfectly. However, a large number of measurement points are required for this approach. To address this problem, in this study, we propose a technique to accelerate the near-field antenna measurement, which is achieved by sparse E-field sampling in the region where the E-field changes smoothly

A novel transmission-line model is used for the analysis of planar structures, including wire-medium (WM) slabs with vertically aligned wires. The network formalism allows for an effective determination of the relevant spectral Green's functions, of the modal dispersion equation via transverse resonance, as well as of the far-field radiation pattern produced by simple sources via reciprocity, as o

This paper presents a new class of quasi-elliptic pass-band filters in substrate-integrated waveguide technology, which exhibits compact size and modular geometry. These filters are based on mushroom-shaped metallic resonators, and they can be easily implemented using a standard dual-layer printed circuit board manufacturing process. The presented filters exploit non-resonating modes to obtain cou

This paper presents the first experimental results of a novel MEMS-based waveguide filter for mobile back-hauling at K-band with adjustable center frequency. The tuning concept employs commercial packaged RF MEMS switches, wire-bonded within a rectangular cavity. The switches are used to perturb the current distribution of the TE101 mode so as to tune the resonant frequency of the cavity. A tuning

An envelope tracking (ET) radio frequency (RF) power amplifier (PA) is described intended for handsets and applications where a large number of PAs are needed. Instead of the usual split frequency architecture, a linear tracking charge pump structure is proposed. This allows the supply voltage of an RF PA to increase during the peaks of a high peak-to-average power ratio signal. When combined with

This paper presents a detailed trap investigation based on combined pulsed I/V measurements, drain current transient (DCT) measurements and low-frequency dispersion measurements of transconductance (LF Y) and output conductance (LF Y). DCT characterization is carried out over a 7-decade time scale. LF Y and Y measurements are carried out over the frequency range from 100 Hz to 1 GHz. These combine

In this study, a sparse multiple-input multiple-output radar system with difference co-array processing is presented. It consists of two non-uniform transmitter arrays in split configuration and a symmetrical hybrid receiver array. A combination of a periodically thinned array and two non-uniform sub-arrays is used to construct the receiver structure. A low-cost three-step optimization procedure i

In this paper, the influence of tree trunks, cylindrical street furniture such as lamp posts, and traffic on ray tracing simulations in an urban scenario is analyzed. Tree trunks and lamp posts are modeled by cylinders and propagation characteristics computed according to the Uniform Theory of Diffraction. The influence of traffic is analyzed by simulations with moving vehicles. In order to get an