In this paper, an antenna with 8 GHz (7?15 GHz) bandwidth is designed, simulated, fabricated, and measured. Commonly, for the effective use of electromagnetic sources, mode converters are used to transform donut-shaped patterns to directive patterns. This paper introduces a novel antenna called the pattern director antenna (PDA) that solves most problems associated with the azimuthally symmetric o

Electromagnetic inverse-scattering problems (ISPs) are concerned with determining the properties of an unknown object using measured scattered fields. ISPs are often highly nonlinear, causing the problem to be very difficult to address. In addition, the reconstruction images of different optimization methods are distorted which leads to inaccurate reconstruction results. To alleviate these issues,

A new type of closed square ring decoupling structure is proposed in this letter, which can effectively reduce the coupling of antennas. The designed antenna is composed of two elliptical monopoles and a common ground loaded with a broadband parasitic decoupling structure. Considering the impedance matching, each antenna element is changed from the original rectangular microstrip feed to a tapered

An optically transparent ultra-wideband (UWB) Vivaldi antenna with a rectifier circuit is proposed in this paper. The proposed antenna is designed and fabricated on a soda-lime glass substrate with fluorine doped conductive oxide (FTO) as the conductive layer. A radial stub is used for better impedance matching and enhancing the impedance bandwidth of the antenna. It operates over a frequency rang

This paper explores an original study of bandpass (BP) negative group delay (NGD) robustness applied to the ring-stub passive circuit. The proof of concept (PoC) circuit is constituted by a ring associated with the open-end stub implemented in microstrip technology. An innovative experimental setup of a temperature room containing the NGD PoC connected to a vector network analyzer is described. Th

An effective method is proposed to excite the untilted edge slot antennas. In the proposed method, two T-shaped wires are placed at both sides of each untilted slot. Two legs of each T-shaped wire are connected to the waveguide walls, while the third leg is open. One of the T-shaped wires connects the upper broad wall of the waveguide to the narrow wall of the waveguide which contains the slots. S

A compact four-element ultra-wideband (UWB) multiple-input?multiple-output (MIMO) antenna with dual polarization and dual-notched capabilities was developed and fabricated. The MIMO antenna is composed of four orthogonally placed half-cutting UWB antenna elements. This orthogonal placement improves the isolation. Furthermore, an L-shaped slot and a continuous bending slot are etched to realize the

In this paper, a novel metasurface-based Fabry?Perot cavity antenna loaded with toroidal metal structures is presented. The antenna is compact, wideband, and has high directivity and a high front-to-back ratio. The idea of the antenna is based on loading a microstrip narrow band patch antenna resonating at 4.5 GHz by a single layer metasurface superstrate and with a toroidal metal structure. The m

This study investigates a low-profile circularly polarized (CP) antenna using coplanar waveguide feeding. Rectangular-shaped slots and an inverted L-shaped slit are entrenched into the ground plane to enhance the impedance bandwidth of the antenna. Furthermore, the antenna is implemented with six elliptical electromagnetic band gap structures on its substrate to enhance the ?10 dB return loss band

This paper presents a gradient-based optimization method for interference suppression of linear arrays by controlling the electrical parameters of each array element, including the amplitude-only and phase-only. Gradient-based optimization algorithm (GOA), as an efficient optimization algorithm, is applied to the optimization problem of the anti-interference arrays that is generally solved by the

In this paper, a leaky-wave antenna (LWA) with wide scanning angle and low cross-polarization is proposed based on a T-type folded substrate-integrated waveguide (FSIW). Transverse slots with a sinusoidal distribution pattern are etched on the surface of the FSIW so that transmission lines with slow-wave characteristics can excite and radiate ?1 order harmonics. The length of the transverse slot a

A compact coplanar waveguide-fed monopole antenna is presented in this paper. The proposed antenna is composed of three monopole branches. In order to achieve the miniaturization, the longest branch was bent. The antenna is printed on an FR4 dielectric substrate, having a compact size of 0.144 × 0.105 × 0.003 at its lowest resonant frequency of 900 MHz. The multiband antenna covers five frequency

In this paper, an efficient dual function radar-communication system is proposed to improve the system's resource utilization. In this work, we considered a scenario where the location of the communication receiver is known prior but the radar target is moving and its location is changing with time. Therefore, we proposed a closed-loop design that allows an adaptive selection of appropriate inform

A compact ultra-wideband (UWB) square and circular slot ground plane planar antenna with a modified circular patch for UWB communication is presented. This antenna has a low reflection coefficient and high gain in the range of 8.94 GHz, starting from 2.85 to 11.79 GHz. The proposed antenna demonstrates UWB behavior with electrically small dimensions of 0.18 ×0.14 ×0.015 ( is the free-space wavele

This paper presents a novel compact dual-band printed antenna with an omnidirectional radiation pattern for 5G WLAN. The antenna element comprises a star-shaped patch with six disc-shaped elements at the top and a defected ground structure at the bottom, having a radius of 3.77 mm for both. The proper feeding point and alignment with its element parameters help to achieve good impedance matching.

In this paper, a novel multiband implantable planar inverted-F antenna (PIFA) antenna based on Gosper curve fractal geometry is designed for biomedical telemetry applications. The antenna has covered four dedicated frequency bands; medical implant communication system band (MICS 402?405 MHz), industrial, scientific, and medical bands (ISM 902928 MHz and 2.4?2.5 GHz), and wireless medical telemetry

A 16-element coplanar waveguide series fed hexagonal array antenna is proposed at millimeter-wave frequency range. In this paper, the analysis is initiated from a single-element hexagonal patch then extended to 1×2 array, 1×4 array, and 4×4 series fed hexagonal patch array antennas. The idea behind this design is to improve fractional bandwidth stage-wise with improved gain maintaining constant ef

The factorization method (FM) is an attractive qualitative inverse scattering technique for the detection of geometrical features of unknown objects. This method depends on the selection of regularization parameters slightingly and has low calculation necessities. The aim of this work is to present a near-field FM for inverse source problems that have many applications. A modified test equation is

In this paper, we propose a frequency-reconfigurable antenna structure consisting of a dielectric resonator (DR) topped by a superstrate material. Two metasurfaces (MSs) are placed upon the DR and the superstrate, where these two MSs are utilized to synthesize a localized reduction of the dielectric constant of the DR. By placing switches into one of the MSs, the distribution of dielectric constan

This article presents the design of an ultra-compact cavity-backed self-diplexing antenna with high isolation employing quarter-mode substrate integrated waveguide (QMSIW). The proposed antenna is constructed by using QMSIW, slot, and two 50? feed lines. Two eighth-mode cavity resonators are designed by inserting a slot on the top side of the rectangular substrate integrated waveguide to operate a

The dumbbell-shaped longitudinal slot antennas are employed as a replacement for the round-ended longitudinal slot antennas. Each dumbbell-shaped slot is excited by an iris and a septum that have offsets from the waveguide centerlines. All the slots are also cut along the waveguide centerlines. It is demonstrated that the resonant length of the proposed dumbbell-shaped slot antennas is much smalle