A new isolated out-of-phase filtering power divider/combiner with high selectivity is presented. Based on a single-layer microstrip, required coupling strength and phase difference are achieved by two pairs of three-line coupled feeding structures. To realize desired bandpass responses, a specific resonator is located between the input and output coupled structures. By connecting a half-wavelength

Dielectric resonator antennas (DRA) are advantageous due to their small size, high radiation efficiency, ease of excitation, and minimal metallic losses. Enhancing the gain of DRA will make them suitable for a variety of applications such as wireless communication technology. High-gain antennas are required for wireless communication to overcome the difficulties of high path loss. The researchers

In this article, an innovative design of a broadband circularly polarized compact planar antenna for RFID (radio frequency identification) receivers is presented. The suggested structure used the concept of slots loaded parasitic element printed underneath a coplanar waveguide-fed radiator to achieve the circularly polarized (CP) radiation and size reduction. A parasitic element loaded with F-slot

A five-slot hexagonal shape chipless RFID tag is designed, simulated, and manufactured on FR4 substrate. The designed tag's copper geometry was replicated on a wide range of dielectric substrate to quantify the impact on resonance quality factor (RQF) and resonating frequencies. The tag's performance was assessed in three configurations. First, a hexagonal shape tag's radar cross section (RCS) was

This study presents a dual-circularly polarized (CP) Fabry?Pérot (FP) antenna, employing a novel receiver?transmitter (RT) metasurface (MS). The RT-MS unit cell consists of two identical neighboring substrates, with a three-layer metal coating printed on their surfaces. The bottom patch is adopted as a receiver to transfer electromagnetic waves to the top-corner cut patch, passing through the coup

The major component for the effective functioning of airborne unmanned aerial vehicles (UAVs) is an antenna. The unified integration of an antenna with UAVs without disturbing the other components of UAVs, compact size, thin, and wideband antennas are preferred. Based on these prerequisites, a low-profile and a wideband antenna is presented for autonomous UAVs for C-band applications. The antenna

An innovative and simple method for attaining broadband frequency reconfigurable antenna structure is presented using low-cost materials and a compact design. The frequency reconfigurability is attained by the ?OFF? and ?ON? mechanisms of three PIN diodes. Many performance observations are carried out such as reflectance coefficient, bandwidth (BW), resonance frequency, electric field, feed positi

In this research article, a metasurface (MTS)-loaded high-gain and broadband circularly polarized (CP) monopole antenna is reported. The proposed antenna configuration consists of a symmetric Y-shaped radiating monopole over a partial ground plane with extended twin parasitic conducting strips (PCS) loaded with a MTS reflector. To achieve left-hand circular polarization characteristics, a metallic

In this paper, a simple and compact coplanar waveguide (CPW)-fed four coexisting inverted-L-shaped radiating elements based wideband (ILW) multi-input and multi-output (MIMO) antenna has been presented for wearable wireless applications. The 50 ? CPW feed structure has been used to excite the four inverted-L-shaped radiators in a wide square slot of the proposed four-port wearable MIMO antenna. Th

This article concerns the design of a new quad-band monopole antenna with a specific configuration and reduced size. The antenna design is based on a single step meander-line parasitic structure, parasitic stubs, and double inverted L-shaped defected microstrip structure units on the top side of the substrate, and double rectangular-shaped defected ground structure units along with partial ground

This paper presents a miniaturized, tunable, high-power, eight-port hybrid coupler, based on a lumped element hybrid coupler topology. The 90° hybrid couplers are ubiquitous elements used for feeding RF coils in quadrature in magnetic resonance imaging (MRI) systems. Due to the low Larmor frequency (64 MHz) of 1.5 T MRI, distributed elements are too large for practical circuits to drive multi-port

In this paper, a ring patch antenna with 1 GHz of bandwidth and three resonances is designed for the RF energy harvesting application. Two complementary split-ring resonators (CSRR) is etched out from the patch, designed at 6.8 GHz, near feed to enhance the bandwidth from 267 MHz to 1 GHz. Due to the introduction of CSRR, two additional resonances at 6.4 and 7.4 GHz are obtained with gain 5.5 and

The meta-surface is introduced into the design of band-notched monopole antennas with single/dual/triple notched bands around 3.6/5.5/7.2 GHz for ultra-wideband (UWB) communication. We show that strong coupling effects between the meta-surface and the antenna would be created through tuning the orientations of the meta-cells according to the field distributions on the antenna surface, and eventual

An 8 × 8 butler Vivaldi beam-steering antenna array is introduced for X-band application. Circularly polarized array is made of eight Vivaldi elements with 1×8 platform and an 8×8 beam feeding network. Vivaldi radiating element is used in array form to enhance impedance bandwidth and overall efficiency such as gain. Using microwave passive components, for instance, 3 dB branch line couplers and cr

A flexible and high gain saw-tooth-shaped boundary fractal wearable antenna is anticipated for WBAN applications. A square shape is converted to the saw-tooth-shaped boundary by sequentially rotating the square at an angle of 45° and overlaid on one another and repeated the same for three iterations. The geometry is built on a flexible jeans substrate, and the total size of the anticipated antenna

Multiple input multiple output (MIMO) systems, which use multiple antennas to deliver faster data rates, are one of the promising methods in 5G services. 5G is a popular issue among the world's main telecom firms currently. The sub-6 GHz band for 5G applications in various countries lies between 3 and 5 GHz. The sub-6 GHz 5G bands are 3.4?3.8 GHz in Europe, 3.1?3.55 GHz in the USA, and 3.3?3.6 GHz

A printed ultra-wideband (UWB) multiple input multiple output antenna with isolation enhancement and pattern diversity is presented, which is based on characteristic modes (CM) for upcoming wireless mobile platforms. The presented antenna is composed of dual UWB antenna elements (AEs) ? an antipodal Vivaldi and a circular-shaped monopole positioned on the two opposite edges of the antenna's rectan

The design of a low-cost, flexible, miniaturized, and a high code density chipless radio-frequency identification (RFID) tag is presented as a solution for tracking the transportation of biomass fuel pellets. The performance of the tag is presented and demonstrates the applicability of the design for different material systems, while maintaining a compact size of 5.06 cm. The tag consists of neste

This work demonstrates a novel, reflective-type, dual-polarized multiband polarization transformer for various C to Ku band applications. The design constitutes a top FSS printed on a thin FR-4 grounded dielectric substrate. A /-polarized incident wave experiences linear-circular conversion from 4.61 to 4.71 GHz (right-hand circular polarized (RHCP)/left-hand circular polarized (LHCP)), 5.44 to 7.

In this paper, a broadband, low insertion loss, and compact folded substrate integrated waveguide (FSIW) phase shifter is proposed for the first time. By loading the complementary split-ring resonators (CSRRs) on the middle metal layer of the FSIW, a closed-type slow-wave transmission line (TL) is obtained, which can provide a wideband phase shift (39%) compared with the equal-length fast-wave one

This article presents wideband metamaterial cross-polarizer (MCP) structure for X-band applications. The proposed MCP consists of a splitted square-shaped resonating structure with two inner and one outer stub. It has an overall dimension of 8.6 mm × 8.6 mm. A wideband polarization conversion ratio (PCR) above 0.87 magnitude is achieved with a bandwidth of 3.49 GHz ranging from 8.8 to 12.29 GHz, w

This paper presents a compact ultrawideband slotted patch antenna for early stage tumor detection applications using microwave breast imaging systems. In order to reduce any reflections between the antenna and breast, the antenna is designed and optimized inside a coupling medium with electrical properties similar to that of normal breast tissue as a coupling medium. The wideband performance of th

We present a self-biased three-stage GaN-based monolithic microwave integrated circuit low-noise amplifier (LNA) operating between 26 and 29 GHz for 5G mobile communications. The self-biasing circuit, common-source topology with inductive source feedback, and RLC negative feedback loops between gate and drain of the third transistor were implemented to achieve low noise, good port match, high stab