This paper presents the design of a sixth-order cross-coupled L-band filter, specifically intended for space applications. The solution was based on the principle of stepped impedance coaxial resonators (SIRs), which allowed us to fulfill several electrical and size specifications and more particularly a high multipactor threshold. The degrees of freedom afforded by the proposed topology offer a w

This paper investigates the frequency response of load modulation networks for asymmetric Doherty power amplifiers (ADPA) with an output back-off power level larger than 6 dB and a power ratio of peak to main amplifier ( ? 1) larger than 1. The influence of the main path impedance transformer (IT) on the Doherty impedances at main and peak path as well as on the ADPA's efficiency is analyzed. Scal

Large-signal modeling of Gallium Nitride (GaN) based high electron mobility transistors (HEMTs) demands a proper description of trapping effects. In this paper, a new, simplified yet accurate drain-lag description is proposed, enhancing the simulation accuracy and the extraction flow of the physics-based compact model ASM-HEMT. The present study investigates the impact of drain lag on specific phy

This article introduces a cylindrical dielectric resonator antenna (CDRA) fed with a rhombic ring-shaped tapered feed for Multiple-Input-Multiple-Output (MIMO) applications. The proposed hybrid MIMO CDRA resonates at four frequency bands 2.5, 5.09, 6.8, and 9.0 GHz with isolation levels of 22, 34.22, 30.55, and 18.55 dB. Isolation enhancements are achieved by introducing ?L? shaped slots on the pa

A wideband staircase pattern defected ground monopole antenna integrated with an artificial magnetic conductor (AMC) reflector has been proposed for C-band (4?8 GHz) and ITU band (8.01?8.5 GHz) applications. The integrated antenna consists of a staircase antenna at top, a 2 × 2 AMC reflector at the bottom and an air substrate as gap between them. The AMC offers 18.5% ± 90° reflection phase bandwid

The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked

This paper presents a polarization-independent 11-bit chipless RFID tag based on frequency-selective surface which has been designed for encoding and relative humidity (RH) sensing applications. The 10 exterior U-shaped resonators are used for item encoding whereas Kapton has been incorporated with the interior resonator for RH sensing. This radio-frequency identification (RFID) tag operates in S-

In this research study, a compact dual-polarized co-radiator ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna with improved impedance bandwidth and isolation is proposed for wireless applications. The designed co-radiator has an overall area of 0.3 × 0.3 mm (where, is free space wavelength corresponding to the lower cut-off frequency, i.e., 3.1 GHz). The proposed resonator compr

This study illustrates the dynamical reconfiguration of a concentric hexagonal antenna array radiation to generate a pencil beam and flat-top beam simultaneously by electronic control in two principle vertical planes under consideration. Both the beams share a common normalized optimal current excitation amplitude distribution while the optimal sets of phase excitation coefficients are varied radi

This research paper introduces a ultra-wideband (UWB) multiple input multiple output (MIMO)/diversity antenna with three rejected bands using one compact electromagnetic band gap (EBG) structure. The suggested EBG structure rejects three bands at WiMAX, WLAN, and the X-band within the passband of the UWB antenna. To achieve compactness in the conventional EBG structure, two via and square slots ar

In order to encrypt/encode data based on the magnitude level of the radar cross-section (RCS), we propose an approach with a precise estimation considering the resonant characteristics of a multipatch backscatter-based chipless radio frequency identification (RFID) dedicated for chipless tags depolarization. The working principle is based on the polarization mismatch between the tag and the reader

A modified ant lion optimization (MALO) algorithm is proposed in this article, for the synthesis of Chebyshev-based arrays by optimizing amplitudes and phases of excitations, and element spacings. Modification in ant lion optimization is achieved by hybridizing it with chaotic particle swarm optimization. The optimization process is employed to obtain an array pattern with the least possible sidel

Fifth-generation technology is not fully deployed in the world wireless communication till date. Millimeter-wave (mm-wave) band needs to be used due to plenty of available bandwidth and for achieving the goals of 5G such as greater data rate, ultra-high-speed video broadcasting, low latency services, and many more. Wideband antenna is required for 5G applications to access the high speed, low late

Designing miniaturized multiband antennas to cover both the 5G new radio frequencies (FR1 and FR2) simultaneously is a challenge for wireless communication researchers. This paper presents two antenna designs : a dual-band printed antenna of size 18 × 16 × 0.285 mm operating at FR1?5.8 GHz and FR2?28 GHz and a triple-band printed antenna with dimensions 30 × 25 × 0.543 mm operating at FR1?3.5 GHz

In this paper, an unconditionally stable time-domain method is proposed to investigate the external electromagnetic (EM) field illumination on the nonlinearly loaded transmission lines. In the proposed algorithm, the field to line coupling equations and linear/nonlinear boundary conditions are incorporated and expressed in a matrix form. The derived differential matrix equations are then discretiz

In this paper, an eight-shaped polarization-dependent electromagnetic bandgap (ES-PDEBG) structure is proposed. The unit cell of ES-PDEBG structure consists of an outer eight-shaped EBG patch with two inner square patches and three vias. Surface wave bandgap and reflection phase characteristics have been studied for the proposed structure. From the measurement results, two surface wave bandgaps wi

In this article, we present two efficient closed-form models to examine thoroughly the dependence of resonant frequency, quality factor, probe reactance, input impedance, bandwidth, and gain on parameters such as patch radius, probe location, substrate electrical parameters, and air gap of a coax probe-fed circular patch antenna. The implementation of these models is very easy and the computation

Despite the great progress in data transmission systems using dielectric waveguides (DWGs) in the millimeter-wave (mm-wave) frequency band (30?300 GHz), the signal distortions caused by DWGs have not yet been fully understood. However, such investigations would help to optimize DWGs as a transmission channel in order to further increase data rate and transmission distance of such systems without t

Realizing packaged state-of-the-art performance of monolithic microwave integrated circuits (MMICs) operating at millimeter wavelengths presents significant challenges in terms of electrical interface circuitry and physical construction. For instance, even with the aid of modern electromagnetic simulation tools, modeling the interaction between the MMIC and its package embedding circuit can lack t

In this paper, a semi-flexible 2 × 1 array antenna is proposed with epoxy glass fiber and graphene as patch and ground, respectively. Microstrip patch antenna with a center parasitic patch of half-wavelength and slot in the radiating patch have been incorporated for the bandwidth enhancement in order of 79.56% (2.21?5.13 GHz). The antenna has an overall size of 0.30 × 0.24 at a lower frequency of

This paper presents a 60 GHz connected slots linear-phased array feeding a high-gain semi-symmetric lens antenna. This design provides high gain, broadband, and beam-steering capabilities for gigabit rate access and backhaul communications. The connected slots antenna array (CSAA) is excited at 16× equidistant points which not only yields spatial power combining but also allows the progressive pha