In this paper, we present a novel flexible moon-shaped slot implantable antenna for neural recording systems and head implants. It covers both medical Industrial, Scientific and Medical band (2.45 GHz) and impulse ratio ultra-wideband (IR-UWB) frequency range (3.1?10.6 GHz) for forward and backward telemetry applications. It has a simple and miniaturized structure in comparison with the antennas r

This paper is focused on explaining the radiation test in temperature performed on the Engineering and Qualification Model of the Medium Gain Antenna Radiofrequency (MGA-RFA) Assembly of ESA's BepiColombo mission. The goal of this program is to observe and study Mercury and its surroundings in a very demanding environment in terms of temperature and radiation. The MGA is an X-band two-axis steerab

This paper presents a review of filtering methods to eliminate echo in antenna measurements. Two different methods, fast Fourier transform and Matrix Pencil, are explained, compared, and simulated in a planar near field where other effects, such as aliasing, can and will be present if the simulation is not appropriately made and the parameters are not carefully chosen. Finally both methods are app

In this study, we investigate a concept that can be used to improve the magnetic field homogeneity in a microwave cavity applied in a novel, high-performance atomic frequency standard. We show that by modifying the boundary conditions in the case of a loop-gap geometry, a good improvement of the field homogeneity can be obtained. Such a design demonstrates high potential to improve the frequency s

Confocal microwave imaging for breast cancer detection relies on accurate knowledge of the average dielectric properties of the patient-specific breast. When accurately estimated, coherent addition will occur at the tumor site, producing a clear and sharp image thereof. Conversely, if the average dielectric properties are poorly estimated, a blurred, unfocused image will be reconstructed, potentia

A tunable radiator for space application has been developed to meet stringent requirements in terms of electrical and environmental specifications but also low mass, simple manufacturing and low cost. The element is based on the folded planar inverted F-antenna, with size of one quarter of wavelength. It is mechanically tunable to adjust input impedance for any various positions on the satellite b

Multiple Input Multiple Output (MIMO) Radar has many advantages compared with conventional Radars including improved target parameters estimation, improved angular resolution while keeping a small number of antennas. Nevertheless, these advantages can be obtained when probing simultaneously the scattering matrix with orthogonal transmit signals. Recently, a passive orthogonal waveform generation t

Passive intermodulation (PIM) is a complex problem in high-power microwave devices and satellite communications. In this paper, an effective calculation method is proposed for predicting PIM power levels of the cascaded microwave devices. First of all, the analytical formula of intermodulation voltage is derived based on the nonlinear I?V characteristics of microwave devices. Then, the mathematica

The proposed research paper presents the design, development, and experimental testing of a broadband stacked complementary microstrip antenna for ultra-wideband (UWB) (5.28?5.85 GHz), Unlicensed National Information Infrastructure band (UNII) (5.25?5.825 GHz), wireless local area networks (WLAN, IEEE802.11a, 5.15?5.35 GHz), and IEEE 802.11b (5.75?5.85 GHz), Worldwide Interoperability for Microwav

In this paper, the design of a new compact uniplanar coplanar waveguide-fed antenna for multiband wireless application is presented and investigated. This antenna has a compact size of 25 × 25 mm and consists of a three parallel stub optimized added on rectangular slot to the radiator patch and T-shaped which inverted in the ground plane. The final prototype antenna designing resonantes at frequen

A new class of 3-dB impedance transforming directional couplers has been proposed in which the recently published coupled-line couplers, consisting of coupled-line sections having different electrical lengths, have been utilized. The main advantage of the proposed directional couplers is the possibility of obtaining high impedance transformation ratio, thus the known limiting condition of realizab

A compact three-dimensional (3D) circularly polarized (CP) microstrip antenna is presented in this paper. The antenna adopts three low-cost printed circuit boards to form an integrated and closed 3D structure, and the radiation patch and the feed patches are etched on the surface of that. A crossed slot is cut on the radiation patch to miniaturize the antenna, and triangular feed patches are intro

An efficient algorithm is proposed for the radar cross-section (RCS) prediction of complex target with electronically large size, which is a combination of geometrical optics and physical optics (GO?PO) method. The method taking the multiple reflections into account is applied to the electromagnetic scattering analysis of a satellite model. Then RCS curves of entire satellite model and the model w

In this paper, a compact dual-band bandpass filter (DB-BPF) using new dual-mode resonator-loaded resonators (DM-RLRs) is presented and investigated to simultaneously achieve controllable return loss (RL), bandwidth (BW) and transmission zeros (TZs), and the simple strategy for this type of filter design is proposed. The DB-BPF consists of two high-flexibility DM-RLRs with separated electric and ma

Owing to dynamic nature of vehicular environments, it becomes essential to achieve effective communication via vehicle-to-vehicle and infrastructure-to-vehicle. This leads to the need for an antenna system that supports multiple frequency bands, high gain, broadside radiation pattern, and circular polarization. We propose single-arm penta-band-based spiral antenna with dimensions of 51 × 35 × 1.57

In this paper, a tri-band bandpass filter (BPF) using asymmetric stub-loaded stepped-impedance resonator (SL-SIR) is presented. The asymmetric characteristic of SL-SIR broadens degrees of freedom for three controllable modes design. Also, the coupling coefficients (M) and the external quality factors (Q) at each passband of the filter can be independently adjusted by the proposed mixed-type feedli

In this paper, a microstrip diplexer composed of two similar resonators is designed. The proposed resonator is consisting of four microstrip cells, which are connected to a coupled lines structure. In order to select a suitable geometric structure, first, all cells are assumed as undefined structures where there is a lack of basic information about their geometry and dimensions. Then, an equivalen

In this paper, a frequency reconfigurable microstrip slot antenna for ultra-wideband applications with switchable band-notch functions is designed and manufactured. To generate a wide usable fractional bandwidth of 3 to over 13.6 GHz, square patch transforms to a fork-shaped patch, also two triangular-shaped strips have been added at above sections of rectangular slot on the ground plane. Band rej

This paper studies the variation effects of incident plane wave on shielded coaxial cables, using Branin's method, which is called the method of characteristics. That model can be directly used for the time- and frequency-domain analyses. Moreover, it had the advantage of being used without the need of setting the preconditions of the charges applied to its ends. This makes it easy to insert in ci

In this letter, a passive high-selectivity dual-band filter with two controllable transmission zero (TZ) pairs is proposed, while synthesis method and control mechanism of the two TZ pairs are investigated. Specifically, by employing the magnetic/electric mixed coupling (MEMC), source?load coupling (S?L coupling) and stepped-impedance resonators, a dual-band bandpass filter with two pairs of contr

A miniaturized substrate-integrated coaxial line (SICL) bandpass filter with improved upper stopband using asymmetrical spiral stub-loaded resonators is presented in this paper. Owing to the space-filling feature of the spiral structure, the size of the proposed filter is significantly reduced. A theoretical analysis is carried out to examine the resonance property of the proposed resonator. It is

This paper presents an original solution to design a compact dual circularly polarized isoflux antenna for nanosatellite applications. This kind of antenna has been previously designed in our laboratory, for a single circular polarization. This antenna is composed of a dual circularly polarized feed and a choke horn antenna. This feed is a cross-shaped slot in the ground plane, which provides coup