Home » Knowledge Centre

Knowledge Centre

Find a document written by the best international scientists in our secure database.

25913 documents
Low-profile closely coupled dual-band MIMO antenna using double layer metasurface
Dayu Qiao, Liping Han, Yufeng Liu, Wenmei Zhang,
A two-element low-profile closely coupled dual-band MIMO antenna is demonstrated for WiMAX applications. Based on the principle of metasurface (MTS) decoupling, a double-layer MTS consisting of pairs of elliptic patches with two different sizes is proposed. The MTS is loaded above a coupled dual-band MIMO antenna, and the mutual coupling in the lower and upper band is reduced by the larger and sma
MRF volume 15 issue 8 Cover and Front matter
Oscar Quevedo-Teruel, Zvonimir Sipus
MRF volume 15 issue 8 Cover and Back matter
Oscar Quevedo-Teruel, Zvonimir Sipus
EuCAP 2022 special issue
Oscar Quevedo-Teruel, Zvonimir Sipus
Adaptive triple-fed antenna and thinned RF-chip integration into ultra thin flexible polymer foil
Serafin B. Fischer-Kennedy, Sefa Özbek, Shuo Wang, Markus Grözing, Jan Hesselbarth, Manfred Berroth, Joachim N. Burghartz
Attaching a wireless transmission system comprising a radio frequency (RF)-chip and a dipole antenna to dielectric material of largely different permittivity leads to strong variation of the antenna feed impedance. Due to the severe impedance mismatch between the RF-chip and the antenna, the performance of the system may deteriorate drastically. The proposed antenna provides three feed points, whi
Fill level measurement of low-permittivity material using an M-sequence UWB radar
Tim Erich Wegner, Stefan Gebhardt, Giovanni Del Galdo
Due to increasingly complex and automated manufacturing processes, the demands on the control parameters of these processes are also increasing. One parameter is the fill quantity of, e.g., liquids in production plants, whose precise determination is of ever-growing importance. Up to now, the exact level of determination under difficult conditions, such as high ambient temperatures, has been a par
A planar microwave sensor for noninvasive detection of glucose concentration using regression analysis
Tilakdhari Singh, Piyush Kumar Mishra, Aditya Pal, Vijay Shanker Tripathi
This paper presents a planar microwave sensor for the noninvasive detection of glucose concentration in diabetic patients. The designed sensor operates from the 3.8 to 6.2 GHz frequency band, which covers the 5.8 GHz Industrial Scientific and Medical (ISM) band. The designed sensor shows a percentage bandwidth of 23.8% with a reflection coefficient () of ?50 dB at the resonance frequency of 5.7 GH
A 38-GHz demodulator with high image rejection in 65 nm-CMOS process
Tian-Wei Huang, Yi-Cheng Huang, Chen Chien, Kun-Chan Chiang, Jeng-Han Tsai
A high image rejection 38 GHz demodulator in TSMC 65-nm CMOS process is presented. To achieve better than ?40 dBc image rejection ratio (IRR), a low I/Q mismatch 45° LO power splitter of sub-harmonic mixer is proposed. In this design, the 45° LO power splitter is composed of a Wilkinson divider, a series delay line with electrical length of 45° on one side of the divider, and a shunt 90° transmiss
Substrate integrated waveguide pedestal filtering-antenna and -arrays for 5G radio frequency front-ends
Elmine Meyer, Cornelis Vertegaal, Leanne Johnson, Petrie Meyer, Ulf Johannsen
This paper presents the design, manufacturing, and measurement of a novel substrate integrated waveguide (SIW) pedestal filtering antenna solution for use in 5G New Radio sub-6 GHz communications. Miniaturization is achieved through the use of SIW pedestal resonators and integration of the radiating element into the filter design, resulting in higher order suppression. The design generates a third
Two-port miniaturized textile antenna for 5G and WLAN applications
Pankaj Jha, Anubhav Kumar, Asok De
A compact, two-element textile MIMO antenna is designed with enhanced isolation by using modification in the ground, open-ended slots along with shorting pins. Maximum 27.8 dB isolation is achieved in two-element antennae, where the edge-to-edge distance is kept at 0.19 which is less than the conventional half wavelength. The Y-shaped decoupling and shorting pins improve the isolation up to 14 dB
0 document

ArtWhere Création de site Internet