A common strategy to reduce the cost of a filter is to use a manufacturing technique with an intermediate accuracy and use tuning elements to compensate for the manufacturing errors. However, including tuning elements in the final EM simulations, and tuning the filters after manufacturing, can be quite challenging. In this context, therefore, we review in this paper two powerful filter design proc

The design and first experimental results of Tx and Rx L-band bandpass filters for a high-power satellite diplexer are presented in this paper. Designed in the framework of an ESA ARTES AT project, the filters are based on TM mode dielectric resonators. These resonators allow for better results in terms of volume occupation with respect to other dielectric resonators still maintaining high Q-facto

In this paper, the influence of the cutting plane as well as the orientation of the cavities in cross-coupled W-band waveguide filters are investigated. When waveguide filters are manufactured with the commonly known CNC (computer numerical control) milling technique, at least one cutting plane is required. The position of this cutting plane has an impact on the composition of the cavities, the ma

This paper presents a review of the recent advances in the field of substrate integrated waveguide (SIW) filters, with particular emphasis on the techniques adopted to increase the out-of-band rejection of the filters and on the miniaturization strategies. After an overview of classical approaches to introduce transmission zeros in SIW filters, a number of recently introduced techniques are presen

This paper describes the outcome of the ?Small user TErminal multi band DIplexer? project where the goal is the validation of novel SMD-compliant planar diplexer. The real application scenario concerns an integrated multi-band radio terminal for ground-segment satellite links. The advantageous and novel approach involves the simultaneous use of three different well-established concepts: a microstr

The novel acoustic transversal topology has demonstrated to be a potential candidate for the development of the next generation of communication filters. The major asset of this topology is its capacity to achieve any filter response without the detriment of limited electro-acoustic coupling. Additionally, this topology prompts for an easy connection of different filters to create multiband and mu

A class of multi-band planar diplexer with sub-sets of frequency-contiguous transmission bands is reported. Such a radio frequency (RF) device is suitable for lightweight high-frequency receivers aimed at multi-band/multi-purpose mobile satellite communications systems. It consists of two channelizing filters, each of them being made up of the in-series cascade connection of replicas of a constitu

A continuously tunable Ku-band waveguide diplexer is proposed in this paper. This diplexer is based on a hybrid coupler topology and is composed of an input filter centered at 11.9 GHz with a 200 MHz bandwidth, a pair of ladder-type hybrid couplers, and a pair of tunable filters. This diplexer can provide two bandpass channels (channels 1 and 2) that can continuously go from a state where the band

This paper aims to present some outcomes from a European Space Agency (ESA) Technology Research Programme (TRP) project on R&D of new design techniques, concepts, and filtering configurations for tunable IF (intermediate frequency) filters with a compact footprint, wide bandwidth tuning range (covering from 49 to 478 MHz at = 1 GHz) as well as equivalent high- performance (i.e. low insertion loss

In this paper, a general method for synthesizing dispersive coupling matrix (DCM) of coupled-resonator bandpass filters with the general dispersion is proposed. Compared to the dispersion-less coupling matrix synthesized by classic approaches, the DCM incorporates the identity of the physical realization and provides an accurate description of the filter. Moreover, the DCM can accurately describe