Proceedings of the 54th European Microwave Conference Fully 3D-Printed Filter Based on Helical Resonators with Elliptical Line Cross-Section Paolo Vallerotonda, Luca Pelliccia RF Microtech Srl, Italy {vallerotonda, pelliccia}-rfmicrotech.com parts are generally joined together through a proper soldering process. Additive Manufacturing (AM) or 3D printing represents an effective alternative that a

Proceedings of the 54th European Microwave Conference A Front End Design in K- and Ka-Band for a Hybrid Steerable Multi-Beam Satellite Antenna Array Andreas Krause, Engelbert Tyroller, Stefan Lindenmeier University of the Bundeswehr Munich, Institute for High-Frequency Technology, Germany {andreas.krause, engelbert.tyroller, stefan.lindenmeier}-unibw.de Abstract ? For a new steerable multi-beam a

Proceedings of the 54th European Microwave Conference Substrate-Integrated Coaxial Line Fed Air-Filled SIW Antenna for the 28 GHz 5G Bands Laura Van Messem1 , Arno Moerman2 , Olivier Caytan3 , Hendrik Rogier4 , Sam Lemey5 IDLab-Electromagnetics group, imec-Ghent University, Belgium {1 laura.vanmessem, 2 arno.moerman, 3 olivier.caytan, 4 hendrik.rogier, 5 sam.lemey}-ugent.be loss [4]. Additionall

Proceedings of the 54th European Microwave Conference Printed Circuit Board Material Characterization at Millikelvin Temperatures for Cryogenic Microwave Circuit Design Nicole Zocher, Tim Pfahler, Martin Vossiek, Christian Carlowitz Institute of Microwaves and Photonics (LHFT), FAU Erlangen-Nürnberg, Germany nicole.zocher-fau.de Abstract ? Cryogenic microstrip designs are required for integratio

Proceedings of the 54th European Microwave Conference Efficient yield optimization of a 100 GHz filter using the novel combination of a performance guided random walk and NLPLS-based PCE Leanne Johnson, Dieter Klink, Werner Steyn, Petrie Meyer Stellenbosch University, South Africa {ljohnson, wernersteyn, pmeyer}-sun.ac.za, dklink-emss.co.za Abstract ? Yield optimization can be a crucial step in h

Proceedings of the 54th European Microwave Conference Ku/K-Band LTCC SMD Circulator for Space Applications S. Jemmeli1, H. Turki1, I. Marah1, J.L. Roux2, C. Karnfelt3, R. Lebourgeois4 1 Exens-Solutions, France CNES: French Space Agency, France 3 IMT Atlantique, France 4 Thales Research and Technology, France Sarra.jemmeli-exens-solutions.com 2 manufacturing process. The ferrite and dielectric m

Proceedings of the 54th European Microwave Conference Investigation and Modeling of Signal-Dispersion caused by Polymer Microwave Fibers (PMF) at sub-THz Frequencies # # # $ Stefan Wögerbauer , Michael E. Gadringer , Helmut Paulitsch , Siegfried Krainer # Institute of Microwave and Photonic Engineering, Graz University of Technology, Austria $ Infineon Technologies Austria AG, Austria {stefa

Proceedings of the 54th European Microwave Conference Investigating Striking Efficiency in Morphogenetic Metasurface Antennas with Low Modulation 1 1 2 1 Chidinma N. Uche , Cyril Decroze , Nasibeh Parsaei , Thomas Fromentèze 1 2 University of Limoges, CNRS, XLIM, UMR 7252, France Centre d?Ingénierie des Systèmes en Télécommunications en ElectroMagnétisme et Electronique (CISTEME), France {c

Proceedings of the 54th European Microwave Conference Assembly and Electrical Tolerance Analysis for Silicon-IC-to-Waveguide Integration using a Contactless Transition at mm-Wave Frequencies * *# * * *# P. Kaul , A. Aljarosha , A. B. Smolders , M. K. Matters-Kammerer , R. Maaskant * Department of Electrical Engineering, Eindhoven University of Technology, The Netherlands # Department of Ele

Proceedings of the 54th European Microwave Conference Investigation of the Electromagnetic Wave?Tissue Interaction of a 75?110 GHz Reflective Resonator Probe for Tissue Classification Damaris Hecht, Tim Pfahler, Martin Vossiek Institute of Microwaves and Photonics (LHFT), Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Germany damaris.hecht-fau.de Abstract ? In this work, the interactio