The well-known range-Doppler coupling property of the chirp radar makes it more vulnerable to different types of deceptive repeater jammers that benefit from the pulse compression processing gain of the radar-matched filter. These jammers generate many false targets that appear before and after the true target. Therefore, the radar cannot distinguish the true target from the false ones. This paper

A novel scheme for power-combined frequency tripler adopting 2N diodes is proposed in this work. Even mode coupled suspended substrate stripline is used to divide and recombine the input and output power. The circuits of the tripler are printed on both sides of the substrate, with N diodes on the front side and the other N diodes on the back side. The front diodes and back diodes are in anti-paral

In through-the-wall radar imaging, multipath propagation can create ghost targets, which can adversely affect the image reconstruction process. However, unlike genuine targets, ghost positions are aspect-dependent, which means their position changes with the transceiver location. This paper proposes efficient ghost suppression methods exploiting aspect dependence feature under compressive sensing

Design guidelines for fractional-N phase-locked loops with a high spectral purity of the output signal are presented. Various causes for phase noise and spurious tones (spurs) in integer-N and fractional-N phase-locked loops (PLLs) are briefly described. These mechanisms include device noise, quantization noise folding, and noise coupling from charge pump (CP) and reference input buffer to the vol

The design and integration of penta-band planar antenna with a low noise amplifier (LNA) for vehicular wireless applications is discussed in this research. By integrating antenna with a LNA, the return loss can be kept low with the increased bandwidth compared with a passive antenna with the same design. The performance of the passive antenna, LNA, and integrated active antenna (IAA) are individua

Magnetic coupling resonance wireless power transfer technology has attracted worldwide attention in recent years due to its mid-range, non-radiative, and high-efficiency power transfer. However, in regard to its practical applications, there are still some issues that need to be considered and studied with respect to coil design, such as coil structure, and parasitic parameter extraction. This pap

A new single-feed aperture-coupled, X-band microstrip patch antenna array with circular polarization (CP) is designed. CP is achieved using indented microstrip patches fed through the slots on a substrate integrated waveguide. The antenna has the high radiation efficiency more than 90% over the operating frequency. Impedance bandwidth (VSWR < 2) and axial ratio bandwidth (AR < 3 dB) of 11.8, and 1

In this paper, a solid co-planar waveguide-fed fractal metamaterial antenna is offered. The proposed design consists of Sierpinski gasket iterations and a complementary triangular split ring resonator (CTSRR) loaded underneath the substrate, which is accountable for pull off multiband uniqueness and resolve good impedance identical. In sketch to hassle multiresonant frequency band facet, these CTS

In this paper, a novel microstrip bandpass filter is proposed to enhance sideband selectivity, suppress harmonic frequency up to three-order as well as to keep a miniaturized size for frequency synthesizer application. The filter is constructed by four /4 folded stepped-impedance resonators (FSIRs) and two /2 stepped-impedance resonators at input/output ports to create three pairs of coupling path