A new class of 3-dB impedance transforming directional couplers has been proposed in which the recently published coupled-line couplers, consisting of coupled-line sections having different electrical lengths, have been utilized. The main advantage of the proposed directional couplers is the possibility of obtaining high impedance transformation ratio, thus the known limiting condition of realizab

A compact three-dimensional (3D) circularly polarized (CP) microstrip antenna is presented in this paper. The antenna adopts three low-cost printed circuit boards to form an integrated and closed 3D structure, and the radiation patch and the feed patches are etched on the surface of that. A crossed slot is cut on the radiation patch to miniaturize the antenna, and triangular feed patches are intro

An efficient algorithm is proposed for the radar cross-section (RCS) prediction of complex target with electronically large size, which is a combination of geometrical optics and physical optics (GO?PO) method. The method taking the multiple reflections into account is applied to the electromagnetic scattering analysis of a satellite model. Then RCS curves of entire satellite model and the model w

In this paper, a compact dual-band bandpass filter (DB-BPF) using new dual-mode resonator-loaded resonators (DM-RLRs) is presented and investigated to simultaneously achieve controllable return loss (RL), bandwidth (BW) and transmission zeros (TZs), and the simple strategy for this type of filter design is proposed. The DB-BPF consists of two high-flexibility DM-RLRs with separated electric and ma

Owing to dynamic nature of vehicular environments, it becomes essential to achieve effective communication via vehicle-to-vehicle and infrastructure-to-vehicle. This leads to the need for an antenna system that supports multiple frequency bands, high gain, broadside radiation pattern, and circular polarization. We propose single-arm penta-band-based spiral antenna with dimensions of 51 × 35 × 1.57

In this paper, a tri-band bandpass filter (BPF) using asymmetric stub-loaded stepped-impedance resonator (SL-SIR) is presented. The asymmetric characteristic of SL-SIR broadens degrees of freedom for three controllable modes design. Also, the coupling coefficients (M) and the external quality factors (Q) at each passband of the filter can be independently adjusted by the proposed mixed-type feedli

In this paper, a microstrip diplexer composed of two similar resonators is designed. The proposed resonator is consisting of four microstrip cells, which are connected to a coupled lines structure. In order to select a suitable geometric structure, first, all cells are assumed as undefined structures where there is a lack of basic information about their geometry and dimensions. Then, an equivalen

In this paper, a frequency reconfigurable microstrip slot antenna for ultra-wideband applications with switchable band-notch functions is designed and manufactured. To generate a wide usable fractional bandwidth of 3 to over 13.6 GHz, square patch transforms to a fork-shaped patch, also two triangular-shaped strips have been added at above sections of rectangular slot on the ground plane. Band rej

This paper studies the variation effects of incident plane wave on shielded coaxial cables, using Branin's method, which is called the method of characteristics. That model can be directly used for the time- and frequency-domain analyses. Moreover, it had the advantage of being used without the need of setting the preconditions of the charges applied to its ends. This makes it easy to insert in ci

In this letter, a passive high-selectivity dual-band filter with two controllable transmission zero (TZ) pairs is proposed, while synthesis method and control mechanism of the two TZ pairs are investigated. Specifically, by employing the magnetic/electric mixed coupling (MEMC), source?load coupling (S?L coupling) and stepped-impedance resonators, a dual-band bandpass filter with two pairs of contr