Home » Knowledge Centre

Knowledge Centre

Find a document written by the best international scientists in our secure database.

25913 documents
Wideband radar cross-section reduction of a microstrip antenna using slots
Jiakai Zhang, Haixiong Li, Qi Zheng, Jun Ding, Chenjiang Guo
In this study, a new microstrip patch antenna with wideband radar cross-section (RCS) reduction is presented. The RCS of the proposed antenna was reduced by subtracting the current-direction slots of the patch, with the radiation performance sustained not only for the current-direction subtraction, but also for the no modification in the ground plane. Modified and reference antenna were fabricated
MRF volume 10 issue 8 Cover and Back matter
MRF volume 10 issue 8 Cover and Front matter
A triple-wideband bandpass filter with controllable bandwidths based on stub-loaded resonators
Li Gong, Yang Xiong, Fan Zhang, LiTian Wang, Yan Sun, XinJie Zhao, Ming He, Lu Ji, Xu Zhang, Bo Zhang
In this paper, a triple-wideband bandpass filter (BPF) with controllable bandwidths based on two multi-mode stub-loaded resonators (MMSLRs) and a triple-mode resonator is presented. The MMSLR is loaded with two identical folded open-ended stubs and a T-shaped stub. Each passband of the tri-band BPF is formed by four resonant modes, which provide sufficient bandwidths to meet various application re
Substrate-integrated waveguide cross-coupled filters with mixed electric and magnetic coupling structure
Amit Ranjan Azad, Dharmendra Kumar Jhariya, Akhilesh Mohan
This paper presents a substrate-integrated waveguide (SIW) mixed electric and magnetic coupling structure implemented on a single-layer substrate to create finite transmission zeros (TZs), which can be used to design microwave filters with higher frequency selectivity. Mixed coupling is realized by three slot-lines on the top metal plane combined with an iris-window between two adjacent SIW caviti
Modified Y-junction SIW power divider/combiner circuit
Kaijun Song, Zihang Luo, Song Guo, Maoyu Fan, Yedi Zhou
A modified compact Y-junction substrate-integrated waveguide (SIW) four-way power divider (PD)/combiner is proposed in this paper. The proposed approach is based on the traditional Y-junction waveguide. By using direct transition structure from SIW to half-mode SIW, four-way PD that provides equal power split to all four output ports is achieved. The even- and odd-mode equivalent circuits are give
Ultra-wideband coplanar waveguide-to-asymmetric coplanar stripline transition from DC to 165 GHz
Yunfeng Dong, Tom K. Johansen, Vitaliy Zhurbenko
This paper presents an ultra-wideband coplanar waveguide (CPW)-to-asymmetric coplanar stripline (ACPS) transition based on aluminum nitride (AlN) substrate. The concepts of designing CPW, ACPS, and CPW-to-ACPS transition are explained. In order to suppress parasitic modes, vias going through AlN substrate are added along the ground traces. The signal trace is tapered out and chamfered to reduce th
Design and realization of a self-actuated frequency-selective radome integrated with microstrip antenna
Qihui Zhou, Peiguo Liu, Bo Yi, Dingwang Yu
In this paper, a self-actuated frequency-selective radome is presented and applied to a microstrip antenna. The radome acts as a self-triggered switchable screen to achieve adaptive electromagnetic protection in the L band. A prototype of the radome is fabricated to measure its transmission performance. The switchable characteristic is verified by a high-power radiation experiment carried out in a
Balun bandpass filter on slot-line resonators with intrinsic balanced performance in amplitude and phase
Lin-Ping Feng, Lei Zhu
In this paper, a novel class of balun bandpass filters is presented on slot-line resonator (SLR) toward intrinsic balanced performance in amplitude and phase. The proposed balun filter consists of three inductive-coupled SLRs in the middle, one single-ended unbalanced port, and one balanced port with two terminals. According to the distinct field conversion from the slotline to the microstrip feed
Criticality mitigation in a quasi-constant coupling position independent resonant IPT network
Alex Pacini, Franco Mastri, Diego Masotti, Alessandra Costanzo
This paper discusses some significant design issues that are faced in resonant inductive system for wireless power transfer ?on the move?. The targeted system adopts a single AC source to power a sequence of transmitting () coils, placed along the path, whose geometry is optimized to minimize the variations of coupling for every possible position. To retain a constant coupling coefficient, two n
0 document

ArtWhere Création de site Internet