This paper focuses on multi-radio front-end transmitter, a function implied by cognitive radio (0.5?6 GHz). S and C bands standards (wireless local and metropolitan area networks) present a challenge, due to the signal modulation schemes (orthogonal frequency division multiplex (OFDM)/WCDMA, wideband code division multiple access) dynamic (tens of dBs), driving us to a mandatory transmitter linear

This paper focuses on multi-radio front-end transmitter, a function implied by cognitive radio (0.5?6 GHz). S and C bands standards (wireless local and metropolitan area networks) present a challenge, due to the signal modulation schemes (orthogonal frequency division multiplex (OFDM)/WCDMA, wideband code division multiple access) dynamic (tens of dBs), driving us to a mandatory transmitter linear

A dielectric waveguide-based structure coupled to a whispering gallery mode (WGM) disc resonator is introduced as a low-cost integrable millimeter-wave (mm-wave) bio-sensor. An efficient variational analysis method is developed and applied to the WGM. Three sets of sensors, operating in different ranges of frequency from 85 to 220 GHz, are fabricated and tested. The performance of the fabricated b

In the present study, the essential oil from the leaves of River Red Gum (Eucalyptus camaldulensis Dehnh) was distilled by microwave applied in situ hydrodistillation (MWHD) and the properties obtained were compared with hydrodistillation (HD) techniques. The chemical composition of essential oil obtained by the microwave method was analyzed by gas chromatography (GC) and GC?mass spectrometry (MS)

In the present study, the essential oil from the leaves of River Red Gum (Eucalyptus camaldulensis Dehnh) was distilled by microwave applied in situ hydrodistillation (MWHD) and the properties obtained were compared with hydrodistillation (HD) techniques. The chemical composition of essential oil obtained by the microwave method was analyzed by gas chromatography (GC) and GC?mass spectrometry (MS)

In this work, a very efficient mixed-potential integral-equation formulation is implemented for the rigorous analysis of multilayered structures with arbitrarily shaped two-dimensional periodic metallic and/or dielectric inclusions. Original acceleration techniques have been developed for the computation of the components of the scalar and dyadic Green's functions, based on different types of asym

This paper introduces a radar system for three-dimensional (3D) object detection and imaging. The presented 3D measurement method combines the frequency-modulated continuous wave (FMCW) approach for range measurements with a multiple-input multiple-output (MIMO) technique for digital beamforming in two dimensions. With an orthogonal arrangement of the antenna arrays for transmit and receive, the a

This paper proposes a systematic approach for designing and modeling letter-shaped microstrip ground slots. Twenty-three structures are investigated. For each one, a geometrical circuit model is developed. Interestingly, 21 letters have unique s-parameters (electromagnetic [EM] print). Results are confirmed by EM simulations and measurements. These results may pave the way to new applications, e.g

This paper proposes a systematic approach for designing and modeling letter-shaped microstrip ground slots. Twenty-three structures are investigated. For each one, a geometrical circuit model is developed. Interestingly, 21 letters have unique s-parameters (electromagnetic [EM] print). Results are confirmed by EM simulations and measurements. These results may pave the way to new applications, e.g