In this paper, a flexible CPW fed ultrawide band (UWB) antenna with mu-negative (MNG) metamaterial is designed, fabricated, and tested for wearable applications. Initially, a UWB antenna of size 50 mm × 43 mm is fabricated on two different substrates, viz. flexible FR4 and semi-flexible Rogers RT/duroid 5880. A metamaterial structure fabricated on flexible FR4 shows a magnetic resonance from 7.2 G

This letter presents a novel tunable coupling structure to simplify the design complexity of the miniaturized fully tunable filter by using open ring and varactors. Based on the proposed novel tunable coupling structure, a fully tunable bandpass filter is implemented with independently tunable operating frequency and bandwidth. The tunable resonator and tunable coupling structure can be easily com

The paper presents a new coplanar waveguide (CPW)-fed rectangular patch antenna with a square-shaped ground plane that can be employed in modern advanced navigation systems. For realizing broad impedance bandwidth in the proposed antenna, a wide slot is introduced in the square ground plane and the rectangular patch is shifted toward the left edge of the ground surface. In addition, by means of in

This paper presents a hybrid design of 1 × 2 and 1 × 4 arrays operating in 0.277?0.292 THz on 65 nm Complementary metal?oxide?semiconductor (CMOS) technology. Each of the chips has an X-band input with 3 ×3 multiplier stages and connected at the output to an on-chip ring antenna. A wideband microstrip Wilkinson four-way and two-way power dividers have been developed on a multilayer printed circuit

This Paper reveals a novel single layer five band frequency selective surface (FSS). Novelties of the proposed FSS lie in its five closely spaced stop bands at 2.4, 3.38, 4.82, 6.32, and 7.75 GHz as well as the reduced single layer structural thickness (0.0016 ) and the miniaturized unit cell size (0.0656 ) at lower resonant frequency as compared to the existing multiband FSS. The unit cell struct

A dualband rejection filter and a triband rejection filter are proposed in this letter, both of which are implemented by cascading spoof surface plasmon polaritons (SSPPs) of the same structure but with diverse rejection bands. Compared with traditional ones, the proposed filters provide more compact structures, wider rejection bands, and better independent tunability. In the proposed filters, the

In this paper, high-gain cavity backed patch antenna arrays are proposed based on low temperature co-fired ceramic technology at 140 GHz. By introducing a substrate integrated cavity to the patch antenna element, the gain is enhanced by 3.3 dB. Moreover, a rectangular ring is loaded around the patch for better impedance matching and further gain enhancement. The final simulated maximum gain of the

A novel design of compact and light-weight horn mounted cylindrical dielectric resonator antenna (CDRA) fed by substrate integrated waveguide (SIW) resonator has been investigated for high gain and multiband applications. SIW resonator contains two closely spaced longitudinal slots of equal length and unequal width to excite the CDRA. These slots are responsible for introducing triple resonating b

A compact wideband out-of-phase power divider (PD) with improved isolation performance is proposed. This divider is formed by connecting an additional stub for isolation to output ports of a traditional Marchand balun with a defected ground structure (DGS) been used. To verify the design, a prototype divider is fabricated and tested. The measured results validate the 53.86% band-width centered at

In this paper, a new path-loss model for electromagnetic wave in an indoor multipath environment is proposed based on matching coefficient, polarization matching factor, and normalized field intensity direction function. This model is called the Friis-extension (Friis-EXT) model, because it operates as the Friis model under certain conditions. In addition, in the modeling process of the path-loss

A compact high-isolation power divider with bandpass response and high-frequency selectivity is presented in this letter. Two dual-mode resonators are used to realize filtering response. The circuit size of the proposed power divider can be reduced by using dual-mode capacitance loaded square meander loop resonators. Due to capacitive load, the resonator can exhibit slow-wave characteristics, whic

This paper presents two modifications of compressive sensing (CS)-based approach applied to the near-field diagnosis of active phased arrays. CS-based antenna array diagnosis allows a significant reduction of measurement time, which is crucial for the characterization of electrically large active antenna arrays, e.g. used in synthetic aperture radar. However, practical implementation of this metho

This paper presents a novel approach for the determination of True-Speed-Over-Ground for trains. Speed determination is accomplished by correlating the received signals of two side-looking radar sensors. The theoretically achievable precision is derived. Test measurements are done in two different scenarios to give a proof of concept. Thereafter a series of field measurements is performed to rate

This paper presents a W-band MIMO radar transceiver chipset for automotive applications, based on a Silicon Germanium technology. It consists of a reference VCO, operating at a center frequency of 38 GHz and a companion IC that comprises a complete millimeter-wave transceiver at 76 GHz. This chipset enables building multipurpose MIMO radar systems that can be scaled in terms of transmitter and rec

This article presents the configuration and technical specification of the passive radar exploiting third-party transmitters of second-generation digital video broadcasting standard DVB-T2 as illuminators of opportunity. The performance of the two-dimensional (2D) passive radar estimated based on theoretical and experimental study is described. The possible configuration of the 2D non-equidistant

We present a novel broadband large-signal vector characterization technique, suitable for high-power broadband Doherty amplifiers (DPAs). It consists of characterizing the DPA three-port sub-circuit composed of the main and peak power devices that are inter-connected by the input network. We discuss a suitable way to extract the three-port -parameters of a DPA sub-circuit, which is based on a pair

The paper presents the results of studies on the effect of transistor DC operating conditions on GaN power amplifiers? (PAs) power efficiency and linearity improved by digital predistortion (DPD). The single-ended 10 W (ISM2.45 GHz) and 150 W (3.4/3.6 GHz) GaN HEMT PAs excited by wideband LTE20 E-TM1.1 signal were tested. To check the applicability of the small-signal approach for designing of LTE

Low loss, ferroelectric, fully-printed varactors for high-power matching applications are presented. Piezoelectric-induced acoustic resonances reduce the power handling capabilities of these varactors by lowering the -factor at the operational frequency of 13.56 MHz. Here, a quality factor of maximum 142 is achieved with an interference-based acoustic suppression approach utilizing double metal?in

This paper describes the development of a power amplifier operating over a 2.4?2.5 GHz frequency range with the output power level more than 15 W and 60% PAE. The transistor applied was the 10 W (13 W ) power GaN HEMT (CGH40010F from Wolfspeed) recommended up to 6 GHz. A harmonic tuning method was used to achieve even 30% more output power than the CGH40010 transistor was specified to deliver whil

A power MOSFET-based push?pull configuration nanosecond-pulse generator has been designed, constructed, and characterized to permeabilize cells for biological and medical applications. The generator can deliver pulses with durations ranging from 80 ns up to 1 s and pulse amplitudes up to 1.4 kV. The unit has been tested for experiments on a medulloblastoma cell line. Following the exposure of cel

The paper is related to an adaptive satellite communication system for data transmission from small, low cost, low Earth orbit satellites. Tests run in a set-up consisting of a number of software-defined radio (SDR) modules operating as a satellite, a ground station, and a satellite channel simulator, have shown that by changing modulation scheme and code rate one can obtain increase of amount of

This paper reports on an ultra-wideband low-noise distributed amplifier (LNDA) in a transferred-substrate InP double heterojunction bipolar transistor (DHBT) technology which exhibits a uniform low-noise characteristic over a large frequency range. To obtain very high bandwidth, a distributed architecture has been chosen with cascode unit gain cells. Each unit cell consists of two cascode-connecte