A 6?18 GHz high-power amplifier (HPA) design in GaN on SiC technology is presented. This power amplifier consists of a two-stage corporate amplifier with two and four transistors, respectively. It has been fabricated on UMS using their 0.25 µm gate length process, GH25. A study of the suitable attachment method and measurement on wafer and on jig are detailed. This HPA exhibits an averaged output

The next generation mobile communication systems impose challenging performance, size, and cost requirements on the power amplifiers (PAs). This paper presents novel DC-biasing circuits, which are compact and yet can control the harmonics almost arbitrarily. The proposed circuit consists of a composite right-/left-handed (CRLH) transmission line (TL) stub, of which the size and harmonics-control f

This paper presents a fully digital transmitter chain from baseband to antenna, including a modulator, two truly digital (i.e. fully switched) microwave power amplifiers and a transmit/receive switch. Both, amplifier and switch monolithic microwave integrated circuits were implemented in a GaN HEMT process. The novel amplifier design provides greatly reduced complexity, needing only three voltage

Nowadays, as indoor localization is getting more popular, there is a growing need for reliable and accurate techniques of position determination. Recently, ultrawideband (UWB)-based systems are gaining popularity, since they make achieving positioning errors in the range of dozens of centimeters or even single centimeters, possible. The Time Difference of Arrival (TDOA)-based systems are especiall

Novel designs of a circularly polarized 2 × 2 and 4 × 4 slot array antennas (CPSAAs) are proposed. Sequential phase feed network composed of a section of 270° and four strips is utilized to feed the array structures. Array elements are simple linearly polarized wide slot antennas (WSAs) composed of simple radiating patches with truncation on four corners and slotted ground plane on substrate backs

In this article, an extremely wideband, isolation-enhanced, low-profile ?Multiple-Input-Multiple-Output? (MIMO) antenna along with dual-band-notched features has been investigated. The antenna proposed herein, possesses two mutually orthogonal staircase-etched radiators for achieving a wide bandwidth. The radiating elements are placed mutually perpendicular in order to achieve polarization diversi

A compact planar ultra-wideband (UWB) antenna with WiMAX and WLAN notched band is presented in this paper. The presented antenna consists of a rectangular patch and slotted partial ground plane and fed by a microstrip feed line. The volumetric size of the antenna is 30 mm × 22 mm × 1.6 mm. Method of moment-based simulation technology is used to simulate and analyze the characteristics of the anten

This paper presents the design and analysis of a wideband X/Ku and Ku band reflectarray antenna. The proposed unit cell of the reflectarray antenna comprises a patch loaded with two distinct slots, viz. a square ring and a cross loop, printed on a low loss substrate, which is backed by a foam-loaded ground plane. The unit cell element offers a linear and large dynamic reflection phase range, which

A low profile super-wideband polarization diversity printed monopole antenna with dual band-notched characteristics is presented the first time. The designed antenna comprises two arched shaped radiating elements with two triangular tapered microstrip feed lines (TTMFL) and two arched shaped partial ground planes, which covers an enormously wide impedance bandwidth (BW) from 1.2 to 25 GHz (ratio B

In noise radar, digital signal processing algorithms for implementing the computation of the Cross Ambiguity Function through range correlation and Doppler compensation call for optimized solutions. In fact, to achieve a high coherent processing gain, they often compute a large amount of data beyond the maximum range and/or the maximum radial velocity of interest, adding useless information. A nov

In this paper, based on a novel multimode stub-loaded resonator, a second-order quad-band bandpass filter (BPF) with mixed electric and magnetic coupling is presented. The electric coupling and magnetic coupling are realized by arranging the parallel coupled lines and the grounded stub, respectively. Eight controllable resonant modes can be simultaneously excited and easily tuned. Eight transmissi

This paper presents slow-wave transmission lines based on non-periodic reactive loading. Specifically, the loading elements are stepped impedance shunt stubs (SISS). By sacrificing periodicity using SISS tuned to different frequencies, multiple transmission zeros above the pass band arise, and the rejection level and bandwidth of the stop band is improved as compared with those of periodic structu

This paper reports on a record-low-phase noise -band signal source with 5 dBm output power, and 1.3 GHz tuning range. The source is based on the unconventional combination of a fundamental frequency 23 GHz oscillator in 150 nm AlGaN/GaN HEMT technology followed by a 130 nm SiGe BiCMOS MMIC including a sixtupler and an amplifier. The amplifier operates in compression mode as power-limiting amplifie

With the aim of performing perimeter surveillance of high-speed railway networks, this paper presents the design of a passive multistatic radar system based on the use of Long-Term Evolution (LTE) downlink signals as the illumination of opportunity. Taking into account the specifications and standard of the LTE system, the ambiguity function of measured downlink signals is analyzed in terms of ran

In the area of electromagnetic metrology, binary coded excitation signals become more and more important and various binary coded sequences are available. The measurement approach is to assess the impulse response function of a device under test by correlating the response signal with the excitation signal. In order to achieve a high measurement reproducibility as well as a high dynamic range, the

The design of mixed-technology quasi-reflectionless planar bandpass filters (BPFs), bandstop filters (BSFs), and multi-band filters is reported. The proposed quasi-reflectionless filter architectures comprise a main filtering section that determines the power transmission response (bandpass, bandstop, or multi-band type) of the overall circuit network and auxiliary sections that absorb the reflect

This work describes the design of a rectenna array exploiting orthogonal, closely-spaced UHF monopoles for orientation-independent RF energy harvesting to energize a passive tag, designed for UWB localization, with wake-up radio (WUR) capabilities. To reach this goal, different RF networks are studied to simultaneously realize RF decoupling of the antenna elements and matching of the radiating ele

This paper describes a method to analyze open or closed elliptical structures with constant axial ratio by a Body-of-Revolution (BoR) Finite Element Method (FEM). The method is based on Transformation Optics, a coordinate transformation that maps the elliptical shape to a circular shape, for which BoR-FEM represents a greatly efficient tool for the analysis.

A new circularly polarized microstrip array antenna using the orthogonal feed technique is proposed in this paper. The antenna has a multi-layer structure and a new 3-way power divider employing the both-sided microwave integrated circuit technology is designed to configure the feed network of the array. Circular polarization (CP) is realized by creating a quadrature phase difference between ortho

This paper presents a comparison of chip connections using aerosol jet (AJ) and bond technology on low-cost printed circuit board (PCB) substrates. First, the behavior of the used gap filler material and the used silver ink for AJ technology on PCBs are characterized. In addition to comparing the radio frequency (RF) performance (DC to 67 GHz) of the two technologies, the mechanical stability is a

Guaranteeing charge conservation of empirically extracted Gallium Nitride (GaN) High-Electron-Mobility Transistor (HEMT) models is necessary to avoid simulation issues and artifacts in the prediction. However, dispersive effects, such as thermal and charge-trapping phenomena, may compromise the model extraction flow resulting in poor model accuracy. Although GaN HEMT models should be extracted, in

The spectral congestion in existing Industrial, Scientific, and Medical (ISM) Wireless Local Area Network (WLAN) bands has led to the emergence of new ISM bands (Unlicensed National Information Infrastructure (UNII)) from 5.150 to 5.710 GHz. In this paper, a simple uniplanar, high gain, microstrip antenna is designed, fabricated, and tested for existing WLAN and new UNII standards. The proposed an