In this paper, two different radiating structures fed with modified L-probe, are reported using a circuit theory concept. The proposed antennas are operating in wireless local area network (WLAN) and universal mobile telecommunications system (UMTS) frequency bands. In the first design, an E-shaped patch is studied to increase the bandwidth. It is observed that the bandwidth is directly proportion

In this paper, the solution of the inverse scattering problem for determining the shape and location of perfectly conducting scatterers by making use of electromagnetic scattered fields is presented. Based on the boundary condition and the measured scattered field, a set of nonlinear integral equations is derived and the imaging problem is reformulated into an optimization one. Then, two evolution

A dual-polarized dual-layer wideband microstrip antenna is presented. Dual orthogonal linear polarization and enhanced isolation between two ports are achieved by employing two radiating patches perpendicular to each other and printed on two separate substrates. Broadband behavior of the antenna is realized by using two wideband double-sided printed strip dipole and angular ring as radiating patch

A four-element wide-band octagonal ring-shaped antenna is proposed for human interface device and -band applications. The isolation structure comprises a parasitic element and a -shaped structure. The antenna has ?10 dB impedance bandwidth 63% (2.1?4.0 GHz) with miniaturized dimension of 54.98 mm × 76 mm. The multiple input multiple output (MIMO) antenna gain is 2.83 dBi at the 2.4 GHz resonant fr

In this paper, the characteristics of microwave propagation channels in drill pipe bore are analyzed by regarding the drill pipe as an irregular lossy cylindrical waveguide. An attenuation law is modeled using multipath propagation theory and an experimental statistical method. It is shown from physical measurement results that 5? and drill pipe bores, widely applied in the field of air drilling,

The measurement accuracy of low-frequency narrow-band antenna is heavily influenced by its environment, which is also difficult to remove the clutter with a time gating. This paper proposes a method to improve the measurement accuracy of low-frequency narrow-band antenna using signal processing technique. The method is to predict the unknown value out of received original signal with an auto-regre

A compact ultra-wideband (UWB) bandpass filter (BPF) based on surface-to-surface transition technology with features of extended stopband and integrated interference mitigation characteristics is proposed. The basic structure consists of a modified multiple-mode resonator (MMR)-based co-planar waveguide in the ground surface and coupled in broadside manner with the microstrip lines on the top surf

Accurately and efficiently modeling the drain-lag effects is crucial in nonlinear large-signal modeling for Gallium Nitride high electron mobility transistors. In this paper, a simplified yet accurate drain-lag model based on an industry standard large-signal model, i.e., the Chalmers (Angelov) model, extracted by means of pulsed S-parameter measurements, is presented. Instead of a complex nonline

This paper presents a novel balanced-to-balanced power divider (PD) based on a simple and compact three-line coupled structure for the first time. By bisecting the proposed symmetrical structure, the differential mode (DM) and the common mode (CM) equivalent circuits can be obtained for analysis. The DM equivalent circuit exhibits a three-line in-phase power dividing response, and then a resistor

A shorted magneto electric dipole with orthogonal dual polarization is designed for modern wireless communications. The proposed antenna is a wideband dual-polarized antenna consisting of magneto electric dipoles, which are fed by novel hook-shaped strip feeds. The antenna proposed in this paper is simulated using EM simulation software called high-frequency structure simulator. The simulated and

Though compact polarimetric approaches have been developed and applied in space and geo researching systems they have not been taken into consideration in automotive applications, yet. A sensor system has been designed to conduct polarimetric measurements in the 77 GHz frequency band, which is permitted for automotive usage. This system is able to transceive linearly as well as circularly polarize

A novel online antenna array calibration method is presented in this paper for estimating direction-of-arrival (DOA) in the case of uncorrelated and coherent signals with unknown gain-phase errors. Conventional calibration methods mainly consider incoherent signals for uniform linear arrays with gain-phase errors. The proposed method has better performance not only for uncorrelated signals but als

In this paper, design and development of a via-free composite right/left handed transmission line (CRLH TL)-based diplexer for WiMAX and WLAN bands is reported. The diplexer is having two channels, where each channel consists of a separate bandpass filter (BPF). The BPF of both channels are designed on via-free CRLH TLs based on a newly proposed right-angled corner-modified split ring resonator (R

This paper specifies a concise review of recent research and development in the context of electromagnetic absorbers. An attempt has been made to justify the need for economical and thin microwave absorbers for achieving good absorption characteristics over a wide range of frequencies within a specified band of electromagnetic spectrum. This paper mainly focuses on the challenges encountered while

In this paper, the design of a graded honeycomb radar absorbing structure (RAS) is presented to realize both a wide bandwidth and absorption over a wide range of angles. For both transverse-electric and transverse-magnetic polarization, a fractional bandwidth of more than 118.6% is achieved for at least a 10 dB reflectivity reduction when the incident angle is <45°, an 8 dB reduction when the inci

This paper proposes a microstrip antenna with reduced in-band and out-of-band radar cross-section (RCS) by subtracting the area of weak scattered current on the ground plane. Fourteen square slots were subtracted from the ground plane, reducing in-band and out-of-band RCS while maintaining radiation performance. Modified and reference antenna surface current distributions were simulated and analyz

In this article, the material distributive topology-based design optimization of ultra-wide band (UWB) antenna is proposed by using improved binary particle swarm optimization (BPSO) with finite difference time domain (FDTD) method. In the improved BPSO implementation, the velocity of each particle is calculated based on complete set of bits of particle position vector. The V-shaped transfer funct

This paper presents a compact microstrip antenna using FR-4 substrate for dual band circularly polarized operation using a modified square ring slot in the ground plane with microstrip line feed. Simulation of the impedance characteristic and radiation characteristic for the proposed antenna is carried out using commercially available HFSS software. The simulated data validate measured results and

A series of novel wideband filtering power dividers (WFPDs) with wide stopband rejection performances is proposed in this paper. The proposed WFPD structure consists of a parallel-coupled line, two transmission line (TL) sections, four loading terminations, and an isolation resistor. The coupled line is applied at the input port to provide wideband impedance transformation, while different types o

Electromagnetic wave of enemy radar propagated by troposcatter is a valuable candidate for beyond line-of-sight detection. There is no analytical study considering the operating range of passive troposcatter detection system. In this paper, we study the way to predict the operating range, which is dominated by propagation loss. The key propagation loss models including statistic model and real-tim