Microwave and millimeter-wave reflectometry is one of the potential techniques for the diagnosis and detection of biological abnormalities, such as subcutaneous masses or cancerous tumors in human body. In this paper, a high-quality microwave sensor based on planar misrostrip resonator is designed, fabricated, and successfully tested with different kinds of biological samples. The proposed sensor

The contribution of this paper is to propose a novel rat-race hybrid coupler of arbitrary coupling coefficient. Traditionally, the rat-race hybrid couplers are built by various loop-alike transmission-lines of multiple quarter-wavelength, and in this paper, we approach the coupler design by using a circular substrate integrated waveguide (SIW) cavity (SIWC). The employed SIWC supports two mutually

In this paper, theoretical/simulation study of specific absorption rate (SAR) and/or temperature distributions in a bi-layered bio-media (fat and muscle)/realistic tri-layered bio-media (skin, fat, and muscle layers) in direct contact with water-loaded metal diagonal horn (MDH) designed at 915 MHz are investigated. The effects of fat thickness on the input reflection coefficient, reflection coeffi

A compact coplanar waveguide (CPW)-fed circular polarization (CP)-antenna for new generation applications with dual bands filtering performance along with CP feature based on unit-cell semi-fractal is proposed in this paper. The CP-antenna privileges from semi-fractal radiator causes to have a miniaturized size. The stopped bands are designed to suppress the interference with present WLAN and ITU-

A novel shape penta-band microstrip patch antenna is presented in this paper. The proposed antenna shows five operating frequencies and can be used for various wireless applications, i.e. 2.58 GHz for non-direct line of sight, wireless Internet service providers, and compatible with Navini Networks; 3.17 and 3.42 GHz for WiMAX; 4 GHz for C-band application such as weather radar systems; and 5.3 GH

A compact and planar broadband circularly polarized (CP) eighth-mode substrate integrated waveguide (EMSIW) antenna is proposed in this paper. An isosceles right triangular waveguide with one electric sidewall (located on one of its catheti) and two magnetic sidewalls (located on the other two edges of the triangle) is presented to investigate the characteristics of the EMSIW. The closed-form mode

A simple multiple-input-multiple-output (MIMO) antenna with quad-band-notched characteristics for ultra-wideband (UWB) system is proposed and tested in the article. Based on two similar radiators, the UWB-MIMO system only occupies 22 mm × 28 mm. By etching an inverted L-like meander slot, two inverted L-shaped slots, and adding a C-shaped stub beside the feeding line, four notched bands are realiz

This paper presents a technique to increase the bandwidth in substrate integrated waveguide (SIW) cavity-backed antennas, inspired by the design of cavity filters. The proposed structure consists of a slot antenna backed by two cavities, located one on top of the other and coupled through a slot. To demonstrate the bandwidth increase, a standard cavity-backed SIW antenna, with a rectangular slot e

In this paper, the first reported waterproof inkjet-printed dual-band monopole antenna on the flexible organic paper substrate is presented. The antenna, which operates at 900 MHz and 2.4 GHz, is inkjet-printed on commercially available photopaper using conductive silver nano-particle ink. To protect it from ambient humidity, a 1 µm thick Parylene-C layer was deposited on top of the antenna. To ve

A simple closed-form analytical formula is proposed to compute the probe reactance of an equilateral triangular patch antenna. The variation of the probe reactance with the variation of antenna dimension, substrate electrical parameters, and probe location is examined thoroughly. The computed values employing the present model show excellent agreement with experimental and simulation results.

This paper focuses on assessing the limitations in the direction-finding process of radio sources with directional antennas in an urbanized environment, demonstrating how signal source antenna parameters, such as beamwidth and maximum radiation direction affect bearing accuracy in non-line-of-sight conditions. These evaluations are based on simulation studies, which use measurement-tested signal p

This paper proposes a dual notched band ultra-wideband (UWB) bandpass filter (BPF) based on hybrid transition of microstrip and coplanar waveguide (CPW). The CPW in ground plane houses a stepped impedance resonator shorted at ends, and is designed to place its resonant modes within the UWB passband. The microstrips on the top plane are placed some distance apart in a back-to-back manner. The trans

In this paper, a metasurface-based aperture-coupled circularly polarized (CP) antenna with wideband and high radiation gain is proposed and analyzed. The proposed antenna is comprised of coplanar waveguide coupling with 4 × 4 corner truncated square patches, which show compact size and low profile. The mechanism of the CP antenna is analyzed theoretically based on the mode analysis and equivalent

In this paper, the resonant frequencies, quality factors and bandwidths of high superconducting circular microstrip patches in the presence of a dielectric superstrate loading have been studied using Galerkin testing procedure in the Hankel transform domain. The exact Green's function of the grounded dielectric slab is used to derive an electric field integral equation for the unknown current dis

This paper proposes, a high gain, Fabry Perot cavity antenna with coplanar waveguide (CPW) fed ultra wide band (UWB) radiating element. The proposed antenna has flat edge arrow shape-based radiating element, which act as a main radiating element and responsible for UWB radiation. This UWB microstrip antenna is parasitically coupled with an array of square parasitic patches (PPs), which act as part

A novel concept of using fractal antenna with metamaterial and slot to achieve multiband operation is investigated. The antenna consists of an -shaped slot in the radiating monopole perturbs the surface current distribution; thereby increasing the total current path length which tends the antenna to further operate at 5.5 (upper WiMAX), 7.3 (satellite TV) and 9.9 GHz (X-band), respectively. The ex

This manuscript deals with the development of a novel configuration of a wide-band single-layer frequency selective surface (FSS) for wide-band rejection applications. The established unit cell is composed of a simple circular ring on the top side of the substrate and a combined conductive element on the backside. Such an inclusion of conductive elements and accurate tuning of their dimensions end

In some circumstances, electromagnetic compatibility testing must be performed not in a specialized anechoic chamber, but in an open space. However, typical absorbers used in anechoic chambers to absorb incident radiation and to reduce the amount of rays reflected from the walls and the floor, such as ferrite tiles and graphite cones, are not suitable in an open space. In this work, we present the

Wireless sensor networks are an increasingly popular tool for monitoring various environmental parameters. They can also be used for monitoring the electromagnetic spectrum. Wireless sensors, due to their small size, typically have simplified radio receivers with reduced sensitivity and use small antennas. As a result, their effective performance area is similarly limited. This is especially impor

We present a continuously tunable 52-to-67 GHz push?push dual-core voltage-controlled oscillator (VCO) in a 40 nm bulk complementary metal?oxide?semiconductor (CMOS) technology. The circuit is suitable for 60 GHz frequency-modulated-continuous-wave radar applications requiring a continuously tunable ultra-wide modulation bandwidth. The LC-tank inductor is used to couple the two VCO cores. The fund

This paper illustrates the different possibilities given by additive manufacturing technologies for the creation of passive microwave hardware. The paper more specifically highlights a prototyping scheme where the 3D-printed plastic parts can be used as initial proofs of concept before considering more advanced 3D-printed parts (metal parts, for instance). First, a characterization campaign has be