Boris Levitas Session M15F SUPERWIDEBAND SAMPLING OSCILLOGRAPHY Dr. Boris Levitas Geozondas JSC, 16 Shevchenko Str., 2009 Vilnius, Lithuania Tel: +370 5 2135304, Fax: +370 2 333816, E-mail: info-geozondas.com ABSTRACT The up-to-date sampling oscilloscopes have a bandwidth from DC to 65 GHz that allows to investigate transients with duration less than 6 ps. Arrangement of the sampling converters, a

Ultra-wideband 3d-imaging Ground Penetrating Radar using Synthetic Waveforms Egil S. Eide 3d-Radar AS O.S. Bragstads Plass 2A N-7491 Trondheim, Norway tel: +47 73 59 47 50, e-mail: egil-3d-radar.com This paper reports results from a ground penetrating radar that uses an antenna array for 3-dimensional underground imaging. The radar applies digitally generated waveforms for high system performance

Multi-band Radiometer for Measuring the Cosmic Microwave Background M. Bersanelli, N. Mandolesi*, J. Marti-Canales** Università degli Studi di Milano, Dipartimento di Fisica, via Celoria 16, 20133 Milano, Italy ­ marco-mi.iasf.cnr.it *IASF/CNR, Via Gobetti 101, 40129 Bologna, Italy ­ reno-iasf.bo.cnr.it ** European Space Agency, P.O. Box 299, 2200 AG Noordwijk, The Netherlands ­ javier.marti.canal

Modeling of Magnetostatic Wave Delay Lines with Side Coupling Between Transducers and Ferrite Film Sergei V. Zagriadski, Senior Member, IEEE, Jaehoon Choi, and Hyeongdong Kim, Member, IEEE Department of Electrical & Computer Engineering, Hanyang University, Haengdang-dong 17, Seongdang-Ku, Seoul, 133-791, Korea, E-mail: zagriadski-ieee.org Abstract The paper presents a new analytical method for s

Fully Integrated Unequal Wilkinson Power Divider with PBG CPW on a GaAS Substrate Young-Joon Ko, Jae Yeong Park, and Jong-Uk Bu Microsystem Group, Material & Devices Lab., LG Electronics Institute of Thechnology, 16 Woomyeon-Dong, Seocho-Gu, Seoul 137-724, Korea (TEL) +82-2-526-4546, (FAX) +82-2-3461-3508, (E-mail) kojoon-LG-Elite.com In this paper, two different approaches are proposed for obtain

Designing a Novel RF MEMS SWITCH for Broadband Power Applications W.Simon 1, B.Schauwecker 2, A.Lauer 1, A.Wien 1 1 IMST GmbH, Carl-Friedrich-Gauss-Str. 2, 47475 Kamp Lintfort, Germany; E-Mail: simon-imst.de 2 DaimlerChrysler AG, Research & Technology, Wilhelm-Runge-Strasse 11, 89081 Ulm, Germany The design of a new type of RF MEMS "toggle" switch for broadband power applications is described. The

Short-Open Calibration Technique for Accurate LE-FDTD Simulation of MEM switches A. Fantauzzi , F. Alimenti , P. Mezzanotte , M. Farina , L. Roselli Dip. di Elettronica e Automatica, Universit` di Ancona, Ancona, Italy. a Dip. di Ingegneria Elettronica e dell'Informazione, Universit` di Perugia, Perugia, Italy. a Tel: +39-75-585.3662, Fax: +39-75-585.3654, E-mail: midnite-diei.unipg.it Abstract

Long Rectangular Microstrip Antenna for Interstitial Microwave Hyperthermia K. Y. YAZDANDOOST , K. SATO* Department of Micro System Engineering University of Nagoya Furo-cho, Chikusa-ku, Nagoya 464-8603 JAPAN yazdan-kaz.mech.nagoya-u.ac.jp * sato-mech.nagoya-u.ac.jp A long rectangular microstrip antenna for interstitial microwave hyperthermia at frequency 2450 MHz is described in this paper. The d

A Proposed Procedure for Monitoring SAR in Mobile Phone Production Martin Siegbahn, Lennart Hamberg and Christer Törnevik Ericsson AB, SE-164 80 Stockholm, Sweden martin.siegbahn-era.ericsson.se, lennart.hamberg-era.ericsson.se, christer.tornevik-era.ericsson.se This study has investigated the possibility of monitoring mass averaged specific absorption rate (SAR) in mobile phone production by use

Microwave based wound healing detection R. Schertlen, F. Pivit, W. Wiesbeck Institut für Höchstfrequenztechnik und Elektronik, Kaiserstr. 12, D-76128 Karlsruhe, Germany ralph.schertlen-ihe.uka.de florian.pivit-ihe.uka.de The paper describes two different approaches for the detection of wound healing. The state of curing of the wound shall be determined without taking off bandages or stickers. Furt