This paper discusses the design of chip-less RFID tags of a standard pocket size of 69 mm by 156 mm. These tags are based on lumped elements of copper metal traces constructed on a thin polyamide flexible substrate. Moreover, a low-cost single-chip Bluetooth detector circuit system is demonstrated. Two different detection methods: variable coil load coupling and optical light intensity detection w

This article presented a compact bandpass filter with wide-stopband performance. Two substrate integrated waveguide (SIW) cavities and a short-circuited coplanar line introduced between the two cavities are used to realize a compact third-order bandpass filter. The passband is generated by combining the resonant frequency of TE mode of the SIW cavities and the fundamental resonant frequency of the

In this paper, two asymmetric co-planar waveguide (ACPW) fed circularly polarized (CP) zeroth-order resonance (ZOR) antennas (Antenna I and II) are presented using a composite right and left-handed transmission line (CRLH-TL) approach. By adding a stub on the left side of the ACPW ground and adjusting its length, circularly polarization property has been achieved in Antenna I. The simulated 3 dB a

We consider the scattering and absorption of the H-polarized plane wave by finite and semi-infinite systems of layers in the THz range. Every layer consists of an infinite graphene strip grating embedded into a dielectric slab. The solution of the problem we obtain in several steps. First, with the use of the method of singular integral equations we obtain scattering matrices of a single layer. Th

This paper presents a simple topology of 180° hybrid coupler with non-interspersed inputs and outputs, as opposed to the conventional rat-race topology. Such hybrid coupler topologies with inputs located on one side and outputs at the opposite side simplify the design of signal routings and module packaging when integrated with other circuits and components. It also relaxes the necessity of using

In this paper, a reduced-size dielectric resonator antenna with switchable diversity patterns is proposed. Ring- and linear-shaped slots are etched in the ground plane of the antenna so as to generate two modes and at a center frequency of 19 GHz. Moreover, two groups of PIN diodes are integrated into these slots to short one group of slots, and let the other group generates the required mode. T

This paper presents the capacity of an S band circularly polarized patch antenna using a ferrite material for low-earth orbiting satellites (2025?2100 MHz for TeleCommand) to obtain a semi-isotropic radiation pattern. Indeed, circularly polarized antennas are generally large and bulky which is often incompatible for spatial applications especially for small satellites. A new antenna design is prop

A high-isolation diplexer based on a dual-mode substrate integrated waveguide (SIW) resonator is proposed in this paper. Based on the theory of the dual-mode resonator, the miniaturized diplexers are designed by using the SIW dual-mode resonators. The superior isolation of the diplexers is obtained because the two operating modes of the dual-mode SIW resonators are not directly coupled and there i