This study introduces an alternative approach to the numerical solution of two-dimensional (2D) electromagnetic scattering problems by a numerical method of moments (MoM). The real source position vector is replaced by a complex quantity, then Green's function generates a complex source point beam, therefore the interactions between the far zone elements in the impedance matrix are neglected, exce

In this paper, two different radiating structures fed with modified L-probe, are reported using a circuit theory concept. The proposed antennas are operating in wireless local area network (WLAN) and universal mobile telecommunications system (UMTS) frequency bands. In the first design, an E-shaped patch is studied to increase the bandwidth. It is observed that the bandwidth is directly proportion

In this paper, the solution of the inverse scattering problem for determining the shape and location of perfectly conducting scatterers by making use of electromagnetic scattered fields is presented. Based on the boundary condition and the measured scattered field, a set of nonlinear integral equations is derived and the imaging problem is reformulated into an optimization one. Then, two evolution

A dual-polarized dual-layer wideband microstrip antenna is presented. Dual orthogonal linear polarization and enhanced isolation between two ports are achieved by employing two radiating patches perpendicular to each other and printed on two separate substrates. Broadband behavior of the antenna is realized by using two wideband double-sided printed strip dipole and angular ring as radiating patch

A four-element wide-band octagonal ring-shaped antenna is proposed for human interface device and -band applications. The isolation structure comprises a parasitic element and a -shaped structure. The antenna has ?10 dB impedance bandwidth 63% (2.1?4.0 GHz) with miniaturized dimension of 54.98 mm × 76 mm. The multiple input multiple output (MIMO) antenna gain is 2.83 dBi at the 2.4 GHz resonant fr

In this paper, the characteristics of microwave propagation channels in drill pipe bore are analyzed by regarding the drill pipe as an irregular lossy cylindrical waveguide. An attenuation law is modeled using multipath propagation theory and an experimental statistical method. It is shown from physical measurement results that 5? and drill pipe bores, widely applied in the field of air drilling,

The measurement accuracy of low-frequency narrow-band antenna is heavily influenced by its environment, which is also difficult to remove the clutter with a time gating. This paper proposes a method to improve the measurement accuracy of low-frequency narrow-band antenna using signal processing technique. The method is to predict the unknown value out of received original signal with an auto-regre

A compact ultra-wideband (UWB) bandpass filter (BPF) based on surface-to-surface transition technology with features of extended stopband and integrated interference mitigation characteristics is proposed. The basic structure consists of a modified multiple-mode resonator (MMR)-based co-planar waveguide in the ground surface and coupled in broadside manner with the microstrip lines on the top surf