An E-band Cassegrain switched beam high-gain antenna concept for 5G backhauling systems is proposed in this article. The antenna requirements target the compensation of small misalignments (within ±1 degrees in both azimuth and elevation planes) in E-band backhauling links due to adverse weather conditions or thermal deformations. The intended antenna is able to realize beam-switching operations b

This paper investigates the performance of 3D-printed dielectric reflectarray antennas (RAs) with wideband behavior and beam-steering capabilities. The designed unit cell consists of a single-layer dielectric element perforated with a square hole, whose side is used to control the local variation of the reflection coefficient. The numerical analysis of the unit cell and of first reflectarray work

An intra-band pattern-corrected decoupling vertical conducting wall is realized by dielectric substrate with conductor cladding on both side wall between two tightly spaced H-plane microstrip patches with /20 edge-to-edge spacing. The wall is grounded and two symmetrical slots are etched on the vertical substrate. The measured results agree with the simulations, showing that the slotted vertical w

In this article, an angle-independent wideband metamaterial microwave absorber (MMA) for C (4?8 GHz) and X (8?12 GHz) band frequency is presented. The unit cell of the proposed MMA consists of outer and inner structure associated with lumped resistors. The outer structure consists of rectangular split-ring resonator, whereas the inner structure consists of circular split-ring resonator. The struct

A compact 12-element multiple-input multiple-output loop antenna array for a fifth-generation (5G) mobile phone is proposed. The operating band for the proposed antenna covers the long-term evolution 42 band, which spans a frequency range of 3.4?3.6 GHz. The size of the single antenna element is 5.85 × 4.9 mm (0.068 × 0.057), and 12 of these elements are positioned along two side edges of the mobi

For future fifth-generation (5G) smartphones, a high-efficiency multiple-input/multiple-output (MIMO) antenna system capable of operating in Long Term Evolution (LTE) 42/43/46 is suggested. A pair of small microstrip-fed slot antenna and inverted F antenna is part of the single antenna design structure. They are positioned on the longer side of the FR-4 printed circuit board. In an effort to lesse

This manuscript presents a 50 ? microstrip-fed quad-element high isolated ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna with band-notched characteristics. The overall area of the proposed structure is 0.33 × 0.33 mm (where depicts the free space wavelength corresponding to the lower cutoff frequency, i.e. 2.54 GHz), etched on an FR-4 substrate of thickness 0.8 mm. The top lay

This paper proposes a passive filtering antenna for ultra-wideband (UWB) applications. The edge chamfering technique is adopted to construct the UWB antenna. The designed UWB antenna has a fractional bandwidth of 135%. A low-pass filter (LPF) is embedded on the feed line of the UWB antenna to convert it into a narrowband antenna that works at 2.45 GHz with 29.5% fractional bandwidth by removing th

In order to solve the problems of low power transfer efficiency (PTE) and limited distance in magnetic coupling resonant wireless power transfer (MCR-WPT) technology. In this paper, based on the magnetic field control ability of metamaterials (MMs), the way to improve the performance of MCR-WPT systems is studied. First, the influence of MMs on the coupling of MCR-WPT system is theoretically analy

We present the design for a thin planar microwave absorber depicting near unity absorption over a wide bandwidth. The absorber consists of a single layer of resistive frequency selective surface inkjet printed over a paper substrate and suspended over a grounded foam. We have been able to achieve 99.99% absorption of normally incident radiations from 9.7 to 11.74 GHz at an extremely low level of ?