Home » Knowledge Centre

Knowledge Centre

Find a document written by the best international scientists in our secure database.

25913 documents
Coupling receiver?transmitter metasurface-based Fabry?Pérot resonant antenna with dual circular polarization
Zhiqiang Yuan
This study presents a dual-circularly polarized (CP) Fabry?Pérot (FP) antenna, employing a novel receiver?transmitter (RT) metasurface (MS). The RT-MS unit cell consists of two identical neighboring substrates, with a three-layer metal coating printed on their surfaces. The bottom patch is adopted as a receiver to transfer electromagnetic waves to the top-corner cut patch, passing through the coup
Compact, broadband, and thin corrugated U-shaped patch-constituted MIMO antennas for airborne UAV applications
Kapil Jain, Vivek Singh Kushwah
The major component for the effective functioning of airborne unmanned aerial vehicles (UAVs) is an antenna. The unified integration of an antenna with UAVs without disturbing the other components of UAVs, compact size, thin, and wideband antennas are preferred. Based on these prerequisites, a low-profile and a wideband antenna is presented for autonomous UAVs for C-band applications. The antenna
Low-cost, compact, and reconfigurable antennas using complementary split-ring resonator metasurface for next-generation communication systems
Shobhit K. Patel, Sunil P. Lavadiya, Juveriya Parmar, Sudipta Das, Kawsar Ahmed, Sofyan A. Taya
An innovative and simple method for attaining broadband frequency reconfigurable antenna structure is presented using low-cost materials and a compact design. The frequency reconfigurability is attained by the ?OFF? and ?ON? mechanisms of three PIN diodes. Many performance observations are carried out such as reflectance coefficient, bandwidth (BW), resonance frequency, electric field, feed positi
Investigation of a high-gain and broadband circularly polarized monopole antenna for RF energyharvesting application
Bikash Ranjan Behera, Sanjeev Kumar Mishra
In this research article, a metasurface (MTS)-loaded high-gain and broadband circularly polarized (CP) monopole antenna is reported. The proposed antenna configuration consists of a symmetric Y-shaped radiating monopole over a partial ground plane with extended twin parasitic conducting strips (PCS) loaded with a MTS reflector. To achieve left-hand circular polarization characteristics, a metallic
Printed compact four-port wearable MIMO antennas for wideband wireless applications
Saurabh Singh, Sudhanshu Verma
In this paper, a simple and compact coplanar waveguide (CPW)-fed four coexisting inverted-L-shaped radiating elements based wideband (ILW) multi-input and multi-output (MIMO) antenna has been presented for wearable wireless applications. The 50 ? CPW feed structure has been used to excite the four inverted-L-shaped radiators in a wide square slot of the proposed four-port wearable MIMO antenna. Th
A novel compact quad-band planar antenna using meander-line, multi-stubs, and slots for WiMAX, WLAN, LTE/5G sub-6 GHz applications
Tarek Maamria, Mouloud Challal, Fateh Benmahmoud, Khelil Fertas, Ammar Mesloub
This article concerns the design of a new quad-band monopole antenna with a specific configuration and reduced size. The antenna design is based on a single step meander-line parasitic structure, parasitic stubs, and double inverted L-shaped defected microstrip structure units on the top side of the substrate, and double rectangular-shaped defected ground structure units along with partial ground
Miniaturized tunable extended eight-port hybrid coupler for 1.5 T MRI
Zachary A. Colwell, Sung-Min Sohn
This paper presents a miniaturized, tunable, high-power, eight-port hybrid coupler, based on a lumped element hybrid coupler topology. The 90° hybrid couplers are ubiquitous elements used for feeding RF coils in quadrature in magnetic resonance imaging (MRI) systems. Due to the low Larmor frequency (64 MHz) of 1.5 T MRI, distributed elements are too large for practical circuits to drive multi-port
Patch antenna with multi-cell EBG for RF energy harvesting applications
Sravya R. Venkata, Vinnakota Sarath Sankar, Runa Kumari
In this paper, a ring patch antenna with 1 GHz of bandwidth and three resonances is designed for the RF energy harvesting application. Two complementary split-ring resonators (CSRR) is etched out from the patch, designed at 6.8 GHz, near feed to enhance the bandwidth from 267 MHz to 1 GHz. Due to the introduction of CSRR, two additional resonances at 6.4 and 7.4 GHz are obtained with gain 5.5 and
Strong coupling induced notched bands of UWB antennas using meta-surfaces
Jinbiao Zhu, Wen Jiang, Yuquan Liu, Pengyu Yin, Lili Guo
The meta-surface is introduced into the design of band-notched monopole antennas with single/dual/triple notched bands around 3.6/5.5/7.2 GHz for ultra-wideband (UWB) communication. We show that strong coupling effects between the meta-surface and the antenna would be created through tuning the orientations of the meta-cells according to the field distributions on the antenna surface, and eventual
High gain and circularly polarized beam-switching 8 × 8 Vivaldi antenna array for X-band application
Tohid Aribi, Tohid Sedghi, Reza Khajeh Mohammad Lou
An 8 × 8 butler Vivaldi beam-steering antenna array is introduced for X-band application. Circularly polarized array is made of eight Vivaldi elements with 1×8 platform and an 8×8 beam feeding network. Vivaldi radiating element is used in array form to enhance impedance bandwidth and overall efficiency such as gain. Using microwave passive components, for instance, 3 dB branch line couplers and cr
0 document

ArtWhere Création de site Internet