Home » Knowledge Centre

Knowledge Centre

Find a document written by the best international scientists in our secure database.

25913 documents
A self-biased GaN LNA with 30 dB gain and 21 dBm for 5G communications
Yi Wang, Tongde Huang, Saisai Jin, Chong Wang, Dongdong Ma, Hongchang Shen, Chong Li, Yuehua Li, Wen Wu
We present a self-biased three-stage GaN-based monolithic microwave integrated circuit low-noise amplifier (LNA) operating between 26 and 29 GHz for 5G mobile communications. The self-biasing circuit, common-source topology with inductive source feedback, and RLC negative feedback loops between gate and drain of the third transistor were implemented to achieve low noise, good port match, high stab
Low profile multi-polarization diversity UWB antenna for body centric communications
Malathi Kanagasabai, Padmathilagam Sambandam, Mohammed Gulam Nabi Alsath, Vikneshwaran Murugesan, Sandeepkumar Palaniswamy, Arunkumar Shrivastav
A low-profile multi-polarized MIMO ultra-wideband antenna suitable for body-centric communications is reported. MIMO configuration is achieved using the symmetric heptagonal monopole (SHM) antenna, a mirrored SHM antenna, an asymmetric ruby-shaped monopole (ARSM) antenna, and a mirrored ARSM antenna placed over the modified C-shaped ground plane (MCGP). The proposed antenna elements are designed t
A wideband decoupling method using bezel-coupled loop-type isolator for smartwatch MIMO applications
Babar Aslam Baloch, Longyue Qu, Zeeshan Zahid, Adnan Ahmed Khan
This paper presents a novel decoupling technique for two-element multiple-in multiple-out (MIMO) antennas for smartwatch applications with floating metallic bezel. The radiating elements consist of embedded loop-type ground-radiation antennas and operate at the 2.45 GHz Bluetooth/Wi-Fi bands. An isolator, consisting of a loop-type structure with a lumped capacitor, is attached externally to the gr
Asymmetrical fed Calendula flower-shaped four-port 5G-NR band (n77, n78, and n79) MIMO antenna with high diversity performance
Tathababu Addepalli, T. Vidyavathi, K. Neelima, M. Sharma, D. Kumar
This research reports a four-port multiple-input-multiple-output (MIMO) antenna designed for 5G-NR band applications including n77: 3.30?4.20 GHz, n78: 3.30?3.80 GHz, and n79: 4.40?5.00 GHz. The proposed design is analyzed in two parts, one single-element asymmetrical fed Calendula flower-shaped antenna and the other four-port modified MIMO antenna with the connected ground. The evolution of the M
Broadbanding and multi-frequency in dielectric resonator antennas: a comprehensive review
Sriparna Bhattacharya (Mitra), Sekhar Chandra Ray
Dielectric resonator antennas (DRAs) are developed antennas that are lightweight, wideband, small-sized and have high radiation efficiency. A DRA is an appropriate candidate for any radio communication including radar applications mainly because of its high efficiency and wideband performance. As the development of DRAs has been a continuous process for more than five decades the plethora of the s
Broadband circularly polarized 2 × 2 MIMO array for midband 5G wireless applications
Aniket Gunjal, Ujwala Kshirsagar
The novel compact size orthogonally fed 2 x 2 Multiple Input and Multiple Output (MIMO) array antenna for mid-band Fifth Generation (5G) wireless application is presented. The antenna configuration consists of diamond-shaped patches employed at the top of substrate. The V-shaped common ground slot structure is employed at the bottom of substrate. A broadband circular polarization is achieved by si
Circular monopole filtering antenna with improved sideband selectivity and in-band impedance using circular-stub-load resonator
Hailong Yang, JinSheng Zhang, Xuping Li, Rongji Li, Yunqi Zhang, Yapeng Li, Xueyan Song, Xiaomin Shi
In the design of the filter antenna, the filter unit with the same structure as the radiation patch not only improves the selectivity of the band edge, but also helps to improve the in-band impedance. In this design, a compact circular monopole filtering antenna with improved sideband selectivity and in-band impedance using a circular-stub-load resonator is proposed. To obtain better sideband sele
High gain wideband and multi-band on-demand reconfigurable antenna for modern wireless application
Rashmi A. Pandhare, Mahesh P. Abegaonkar, Chandresh Dhote
This paper proposes a wide band and multiband frequency reconfigurable antenna that can operate in the UWB, GSM, GPS, 4G LTE, WLAN, and WiMAX bands. The antenna is made up of a trapezoidal-shaped monopole radiator, which was inspired by a rectangular monopole antenna. The ground plane is modified by embedding T and L-shaped slots to notch the desired operating frequency. The proposed antenna can s
Design and fabrication of an inverted hat antenna paired with a filled cavity for radio-navigation applications
Z. Hamouda, S. Azaizia, M. Hideche, A. Zemmam, T. Lasri
Antennas installed on aircraft are used for communications as well as for various radio navigation systems such as direction finders, distance measuring systems, and altimeters. Generally, these systems use blade antennas operating in the L frequency band. Recently, inverted-hat empty section monopole antennas have been found to be good candidates for such uses. In this study, we propose a new des
A dual-band filtenna with improved gain using AMC for 5G sub-6 GHz applications
I. Suryarajitha, Ruchi, R. K. Panigrahi, M. V. Kartikeyan
A gain enhanced dual-band filtenna operating at frequency bands of 3.5 and 5.3 GHz for 5G sub-6 GHz applications is presented in this article. A dual-band antenna is integrated with a filter to improve selectivity. The antenna uses printed monopoles as the radiating element, and the filtering response is achieved using a modified feedline. The designed filtenna is 50 × 38 × 1.63 mm in size with a
0 document

ArtWhere Création de site Internet