Home » Knowledge Centre

Knowledge Centre

Find a document written by the best international scientists in our secure database.

25913 documents
A compact frequency reconfigurable patch antenna with asymmetric armed U and reversed L slots for handheld wireless devices
Bhaben Saikia, Kunal Borah
A frequency reconfigurable microstrip patch antenna with a combination of an asymmetric armed U-slot and a reversed L-slot etched on a rectangular base patch of 6 GHz resonant frequency designed on an FR4 substrate ( = 4.4) is presented in this paper. Three RF PIN diodes are positioned at inimitable sites of these slots to achieve frequency reconfiguration. A DC bias circuitry, which includes DC b
Ultra-wide band flexible antenna applicable for dual-band on-body communications
Walaa M. Hassan, Ayman Ayd R. Saad, Ahmed A. Ibrahim
In this article, an ultra-wideband printed flexible monopole antenna is proposed for indoor wireless communications. A flexible Rogers RO3003 is used as a substrate, and its performance is estimated for a flat state and when subject to bending along the -axis. A 2.45 and 5.8 GHz dual-band textile artificial magnetic conductor (AMC) surface consisting of a 4 × 4 unit-cell array was integrated into
Multi-layer approach of polarization agile oscillating-type active integrated array antennas for RFtransmitter front-end
Maodudul Hasan, Eisuke Nishiyama, Ichihiko Toyoda
This paper presents a polarization switchable self-oscillating active integrated array antenna (AIAA) using a multi-layer approach. The antenna comprises two antenna elements, four PIN diodes, and a Gunn oscillator employing a microstrip line resonator. Reconfiguring the feed network of the array antenna realizes slant polarization (± 45°) switching. The multi-layer structure allows the patch spac
MRF volume 15 issue 3 Cover and Back matter
MRF volume 15 issue 3 Cover and Front matter
Design of miniaturized single and dual-band bandpass filters using diamond-shaped coupled line resonator for next-generation wireless systems
Bilal Mushtaq, Sohail Khalid
This paper presents a multi-mode resonator (MMR) for next-generation wireless systems that achieves single and dual-band bandpass filter (BPF) responses using a split-ring dual-path structure. The proposed BPF design is realized by employing two pairs of parallel couple lines and two symmetrical step-impedance open-circuited stubs (SIOCS). SIOCS are used to improve selectivity and increase the num
An adaptive approach for the detection of contrast targets for the through-wall imaging
Mandar K. Bivalkar, Sashwat Pandey, Dharmendra Singh
Through-wall imaging is capable of detecting various living and non-living things behind the wall. The characteristics of the wall under the investigation, amount of clutter and noise govern the quality and reliability of the image as well as the detection ability of the targets using through the wall imaging system. The characteristics of the wall are not known prior, in the literature only the i
Balanced quasi-elliptic-type dual-passband filters using planar transversal coupled-line sections and their digital modeling
Li Yang, Mohamed Malki, José-María Muñoz-Ferreras, Roberto Gómez-García
A class of balanced dual-band bandpass filters (BPFs) with planar transversal-signal-interference coupled-line sections is reported. In their building balanced dual-band BPF stage under differential-mode excitation, a second-order quasi-elliptic-type dual-band bandpass filtering transfer function is obtained. Specifically, from the transversal interaction among their two open-ended and virtually-s
Automatic golden device selection and measurement smoothing algorithms for microwave transistor small-signal noise modeling
Andrei S. Salnikov, Igor M. Dobush, Artem A. Popov, Dmitry V. Bilevich, Aleksandr E. Goryainov, Alexey A. Kalentyev, Aleksandr A. Metel
We propose the techniques for automatic processing of measurement results in the context of golden (typical) device selection and noise figure measurement. These techniques are for golden (typical) device selection and noise figure measurement processing. Automation of measurement result processing and microwave element modeling speeds up a modeling routine and decreases the risk of possible error
A surface deformation measurement algorithm for reflector antennas based on complex geometrical optics
Boyang Wang, Qian Ye, Li Fu, Guoxiang Meng, Qinghui Liu, Zhiqiang Shen
This paper presents a new method to reveal the relation between the surface deformation and near-field amplitude of a reflector antenna based on complex geometrical optics, which could be used as an efficient way to estimate the antenna surface verified by simulation results. The measurement process based on this method is envisaged to be realized by a single scanning of the near-field amplitude w
0 document

ArtWhere Création de site Internet