A compact dual-wideband (DWB) bandpass filter utilizing open-shorted coupled lines (OSCL) is proposed in this paper. The introduction of the folded structure not only reduces the overall size but also contribute to the split of the transmission zero (TZ), which improves the selectivity effectively. Six transmission poles and five TZs are realized utilizing the shorted-circuit stub and OSCL. The ch

The ultra-wideband bandpass-response power divider with high-frequency selectivity is presented in this paper. This power divider consists of an impedance transformer, a filter network, and two isolation resistors. In order to realize the ultra-wideband filtering performance, parallel coupling lines and parallel open-circuit branches are applied to the second impedance converter. A resistor is add

This paper presents a miniaturized 3-dB branch-line coupler based on slow-wave microstrip transmission lines. The miniaturized coupler operating at 2.45 GHz is designed and implemented on a double-layer printed circuit board substrate with blind metallic vias embedded in the lower substrate layer providing the slow-wave effect. Based on this concept, a 43% size miniaturization is achieved as compa

Pulse compression technique allows a radar to achieve the resolution of a short pulse and the energy of a long pulse simultaneously, without the requirement of high-power transmission. Therefore, pulse compression radars have a low probability of intercept capability. The common types of pulse compression signals are frequency modulated waveforms and phase-coded waveforms, which have different pro

This paper aims at investigating the dependence of the impedance and the radiation characteristics of a cylindrical dielectric resonator antenna (DRA), on the feed point of the DRA. It is demonstrated that the resonant frequency, bandwidth, radiation pattern symmetry, and cross-polarized radiation levels depend highly on the feed point. Three standard single-ended feed mechanisms such as the micro

Frequency- and time-domain characteristics as well as indoor propagation channel impulse response of a compact dual band-notched ultra-wideband (UWB) slot antenna are investigated in this paper. The antenna consists of a narrow rectangular radiation patch and a rectangular wide slot in the modified ground plane. A pair of -shaped stubs are connected to the radiation patch to obtain band-notched pr

In this paper, we present a novel dual-band wearable compact flexible antenna for body-centric wireless communications (BCWCs). The design is based on a modified planar dipole with parasitic elements, meandered lines, and a rectangular reflector embedded into a hydrophobic rubber-textile multilayer substrate in order to get both good antenna performance and mechanical properties. The antenna's str

A coplanar waveguide slot antenna is herein presented. A rectangular slot is excited by a Y-shaped monopole etched on a single FR4 substrate. This structure exhibits two resonances due to the presence of the slot and the central monopole which can be used to design a dual-band or a wideband antenna. A parametric analysis is presented to describe the impedance matching mechanism for the two impedan

A modified H-shaped metamaterial is imparted in this paper that has a multiple band coverage for reflection and transmission coefficient. The proposed structure exhibits triple band coverage for the permittivity and permeability. Two split ring resonators (SRR) are connected with the substantial H-shaped structure. The 12 × 12 mm structure has been printed on FR-4 and a correlation is made between

A new planar multiple-input?multiple-output (MIMO) antenna for ultra wideband (UWB) applications is presented. The proposed antenna operates over the frequency band from 3.1 to 10.6 GHz and it consists of two identical circular monopoles on an FR substrate. The wide isolation is achieved through a novel planar decoupling structure that is being inserted between the dual antennas. Moreover, a cente