A compact printed reconfigurable monopole antenna with switchable band-notches is designed and manufactured. The proposed antenna mainly consists of a disc-like radiator with two pairs of T-shaped strips protruded inside a rectangular aperture. Five PIN diode switches are employed to bridge or open the slots, which allow the antenna to be configured into three different structures functioning as a

This paper investigates a wideband and low axial ratio circularly polarized (CP) antenna, which is composed of a monopole on a novel polarization rotating reflective surface (PRRS) based on a corner-truncated artificial magnetic conductor (AMC) structure. By adjusting the dimensions of truncated corner properly, the PRRS has two polarization rotation (PR) frequency points. Then, a large PR band of

In this study, wideband bandpass power divider with good out-of-band performance is proposed. Two bandpass filters (BPFs) are utilized to substitute the quarter-wavelength transmission line in conventional Wilkinson power divider. A resistor is specially arranged between two BPFs for a good isolation. Four transmission zeros (TZs) are found to be distributed in the lower and upper stopband of the

The next generation of wireless networks (5G) employs directional transmission at millimeter wave (mmW) frequencies to provide higher bandwidth and faster data rates. This is achieved by applying antenna arrays with proper beam steering capabilities. Rotman lens has long been used as a lens-based beamformer in electronically scanned arrays and its efficient design is important in the overall perfo

In this study, a new microstrip patch antenna with wideband radar cross-section (RCS) reduction is presented. The RCS of the proposed antenna was reduced by subtracting the current-direction slots of the patch, with the radiation performance sustained not only for the current-direction subtraction, but also for the no modification in the ground plane. Modified and reference antenna were fabricated

In this paper, a triple-wideband bandpass filter (BPF) with controllable bandwidths based on two multi-mode stub-loaded resonators (MMSLRs) and a triple-mode resonator is presented. The MMSLR is loaded with two identical folded open-ended stubs and a T-shaped stub. Each passband of the tri-band BPF is formed by four resonant modes, which provide sufficient bandwidths to meet various application re

This paper presents a substrate-integrated waveguide (SIW) mixed electric and magnetic coupling structure implemented on a single-layer substrate to create finite transmission zeros (TZs), which can be used to design microwave filters with higher frequency selectivity. Mixed coupling is realized by three slot-lines on the top metal plane combined with an iris-window between two adjacent SIW caviti

A modified compact Y-junction substrate-integrated waveguide (SIW) four-way power divider (PD)/combiner is proposed in this paper. The proposed approach is based on the traditional Y-junction waveguide. By using direct transition structure from SIW to half-mode SIW, four-way PD that provides equal power split to all four output ports is achieved. The even- and odd-mode equivalent circuits are give